F2CFS-T555-141 Просмотр технического описания (PDF) - Unspecified

Номер в каталоге

Компоненты Описание

производитель

F2CFS-T555-141

MOTOMAN Operating and Maintenance Instructions DK

Unspecified 

DANGER due to electric current

If electrical current is not handled properly, this may result in a life-threatening situation.

Therefore, particular attention must be paid to the following:

 Only qualified electricians may perform jobs on electrical systems.

 When working on electrical systems and components, all relevant guidelines,

regulations and technical rules must be observed.

 All electrical systems, sub-assemblies and parts must be regularly checked for

sound state and proper functioning and replaced if necessary. The checks must be

performed in accordance with the valid guidelines and the manufacturer's

specifications.

 During wiring work the specifications of the manufacturer's electric circuit diagrams

(wiring diagrams) must be observed.

 Work and troubleshooting on an open control cabinet or on open devices are to be

performed with the necessary caution and care because the main power supply

terminals can be live, or there may be an external supply voltage.

 Even when the main switch is OFF, certain electrical circuits are still connected to the

power supply voltage!

 Persons with cardiac pacemakers or similar medical aids must not be in the vicinity of

large electric currents or voltages, strong magnetic fields or other sources of

disturbances that may affect the medical aid.

 All cables and lines must be fixed, undamaged, insulated, and have the adequate

dimensions. Loose connexions or cables and lines that are burnt, damaged or have

inadequate dimensions must be replaced immediately by an authorised electrician.

2.3 Safety instructions on electrical commissioning

DANGER due to electric

current

If electrical current is not handled properly, this may result in a life-

threatening situation.

Therefore, particular attention must be paid to the following:

 Only qualified electricians may perform jobs on electrical systems.

 For this, See “Particular risks due to electric current” on Page 9.

10

MRD64092EN.5.I

Share Link: