AV3624619 Просмотр технического описания (PDF) - Panasonic Corporation
Номер в каталоге
Компоненты Описание
производитель
AV3624619 Datasheet PDF : 18 Pages
| |||
AV3/AVM3/AVT3/AVL3 (FS/FS-T) Subminiature Switches
SPECIFICATIONS
■ Contact rating
Type
Standard version
Au-clad contact type
Contact
specification
AgNi alloy contact type
Plunger color: Black
Triple layer
contact type
Plunger color:
Red
Double layer
contact type For
low-level circuit
Plunger color:
Green
Load style
Contact
voltage
125V AC
250V AC
30V DC
125V DC
Resistive load
(cosφ≒1)
3A
3A
3A
0.4A
Inductive load
(cosφ≒0.6 to 0.7)
2A
2A
2A
0.05A
Resistive load
(cosφ≒1)
0.1A
0.1A
0.1A
—
Note: Time constant shall be less than 7 msec. for DC inductive loads.
Inductive load
(cosφ≒1)
—
—
0.1A
—
Long life version
Au-clad contact type
AgNi alloy contact type
Plunger color: Black
Triple layer
contact type
Plunger color:
Red
Double layer
contact type For
low-level circuit
Plunger color:
Green
Resistive load
(cosφ≒1)
5A
5A
5A
0.4A
Inductive load
(cosφ≒0.6 to 0.7)
3A
3A
3A
0.05A
Resistive load
(cosφ≒1)
0.1A
0.1A
0.1A
—
Inductive load
(cosφ≒1)
—
—
0.1A
—
• Low-level circuit rating (Au-clad contact type)
Rated voltage
Resistive load
6 V DC
5 mA
12 V DC
2 mA
24 V DC
1 mA
• Contact material reference chart classified by load voltage &
current
3A
AgNi alloy
100mA
Au-clad triple layer contact type
Au-clad double layer
contact type
1mA
0
DC
5
AC
5
15
30V
30
250V
Note: If the contact is being used in the constant low-level circuit load range, the
Au-clad double layer contact type is recommended. If there is a danger of
the current being less than 0.5 A, for instance if the contact is being turned
on and off, the Au-clad triple layer contact type is recommended.
The diagram above is intended as a reference. Please use the product
within the rated voltage and current.
■ Characteristics
Item
Expected Mechanical life
life
Electrical life
Insulation resistance
Between non-continuous
terminals
Dielectric Between each terminal and
strength other exposed metal parts
Between each terminal and
ground
Standard version
Long life version
AgNi alloy contact Au-clad contact AgNi alloy contact Au-clad contact
type
type
type
type
Min. 5 × 105 (OTmax.)
Min. 3 × 107 (OT: Specified value)
Min. 107 (OTmax.)
Min. 5 × 104
Min. 2 × 105
5 × 104
2 × 105
Min.100MΩ
1,000 Vrms
1,500 Vrms
1,500 Vrms
Contact resistance (Initial)
Max. 50 mΩ
Max. 100 mΩ
Max. 50 mΩ
Max. 100 mΩ
Vibration resistance (Pin plunger type)
Shock resistance (Pin plunger type)
10 to 55 Hz at single amplitude of 0.75mm
294 m/s2 min.
(OF 0.98 N type)
147 m/s2 min.
(OF 0.49 N type)
294 m/s2 min.
(OF 0.98 N type)
147 m/s2 min.
(OF 0.49 N type)
49 m/s2 min.
Min. 294 m/s2
(OF 0.25 N type)
Allowable operating speed (no load)
0.1 to 1,000 mm/sec.
Max.operating cycle rate (no load)
300 cpm
Ambient temperature
–25°C to +85°C
Unit weight
Approx.2g
Protection grade
IP40
Note: Test conditions and judgement are complying with “NECA C 4505”.
Min. 294 m/s2
Test condition
at 60 cpm
at 20 cpm, at rated load, OT max.
at 500V DC
Ag alloy contact type: by voltage drop 1 A,
6 to 8V DC
Au-clad contact type: by voltage drop 0.1 A,
6 to 8V DC
Contact opening: Max. 1 msec.
Contact opening: 1 msec. max.
no freezing and condensing
Panasonic Corporation Electromechanical Control Business Division
industrial.panasonic.com/ac/e/
6
© Panasonic Corporation 2019
AECTB10E 201903
Share Link: 