AXN426430P Просмотр технического описания (PDF) - Panasonic Corporation
Номер в каталоге
Компоненты Описание
производитель
AXN426430P Datasheet PDF : 13 Pages
| |||
AXN(1/3/4)
SPECIFICATIONS
1. Characteristics
Item
Electrical
characteristics
Rated current
Rated voltage
Breakdown voltage
Insulation resistance
Contact resistance
Mechanical
characteristics
Composite insertion force
Composite removal force
Contact holding force
Ambient temperature
Soldering heat resistance
Storage temperature
Specifications
3mm, 3.5mm, 4mm, 4.5mm,
5.0mm, 5.5mm, 6.0mm, 7.0mm,
8.0mm, 13.0mm, 14.0mm type
11.5mm type
0.5A
60V AC/DC
250V AC for 1 minute
Min. 1,000MΩ
Max. 60mΩ
Max. 50mΩ
Max. 43.1N (30 pin contacts) Max. 0.785N × no. of pins (initial)
Min. 6.37N (30 pin contacts)
Min. 0.127N × no. of pins
40 pin contacts or less:
Min. 1.96N
50 pin contacts or more:
Min. 0.981N
Min. 1.96N
–55°C to +85°C
Max. peak temperature of 245°C (on the surface of the PC board
around the connector terminals)
300°C within 5 seconds
–55°C to +85°C (product only)
–40°C to +50°C (standard packing)
Conditions
Detection current: 1mA
Using 500V DC megger
Based on the contact resistance
measurement method specified by
JIS C 5402.
Measuring the maximum force.
As the contact is axially pull out.
No freezing at low temperatures
Infrared reflow soldering
Soldering iron
No freezing at low temperatures.
No dew condensation.
Conformed to MIL-STD-202F, method 107G
Thermal shock resistance
(header and socket mated)
Environmental
characteristics
Humidity resistance
(header and socket mated)
Saltwater spray resistance
(header and socket mated)
H2S resistance
(header and socket mated)
Lifetime
characteristics
Unit weight
SO2 resistance
(header and socket mated)
Insertion and removal life
5 cycles,
insulation resistance
min. 100MΩ,
contact resistance
max. 60mΩ
5 cycles,
insulation resistance
min. 100MΩ,
contact resistance
max. 50mΩ
120 hours, insulation resistance
min. 100MΩ,
contact resistance
max. 60mΩ
24 hours,
insulation resistance
min. 100MΩ,
contact resistance
max. 60mΩ
48 hours, contact resistance
max. 60mΩ
240 hours, insulation resistance
min. 100MΩ,
contact resistance
max. 50mΩ
48 hours,
insulation resistance
min. 100MΩ,
contact resistance
max. 50mΩ
96 hours, contact resistance
max. 50mΩ
48 hours, contact resistance
max. 60mΩ
96 hours, contact resistance
max. 50mΩ
50 times
100 times
Mated height 3mm 30 pin contacts; Socket: 0.26g Header: 0.26g
50 pin contacts; Socket: 0.40g Header: 0.44g
Order
1
2
3
4
Temperature (°C)
–55−03
85+30
–55−03
Time (minutes)
30
Max. 5
30
Max. 5
Bath temperature 40±2°C,
humidity 90 to 95% R.H.
Bath temperature 35±2°C,
saltwarter concentration 5±1%
Bath temperature 40±2°C,
gas concentration 3±1 ppm,
humidity 75 to 80% R.H.
Bath temperature 40±2°C,
gas concentration 10±3 ppm,
humidity 90 to 95% R.H.
Repeated insertion and removal speed of
max. 200 times/hours
2. Material and surface treatment
Part name
3.0mm, 3.5mm, 4.0mm, 4.5mm, 5.0mm, 5.5mm,
6.0mm, 7.0mm, 8.0mm, 13.0mm, 14.0mm type
Material
Surface treatment
Molded portion
Heat-resistant resin
(UL94V-0)
—
Bracket
—
—
Contact
Copper alloy
Contact portion:
Ni plating on base, Au plating on surface
Terminal portion:
Ni plating on base, Au plating on surface
(Except for thick of terminal)
Material
LCP resin
(UL94V-0)
Copper alloy
Copper alloy
11.5mm type
Surface treatment
—
Cu plating on base, Sn plating on surface
Contact portion:
Ni plating on base, Au plating on surface
Terminal portion:
Ni plating on base, Au plating on surface
(Except for thick of terminal)
ACCTB25E 201303-T
Panasonic Corporation Automation Controls Business Division industrial.panasonic.com/ac/e/
Share Link: 