NAS1801 Просмотр технического описания (PDF) - Unspecified

Номер в каталоге

Компоненты Описание

производитель

NAS1801

Screw, Hex Head, Cruciform Recess, Full Thread, 160,000 PSI Tensile Minimum Alloy Steel and A286 Corrosion Resistant Steel

Unspecified 

Genuine Aircraft Hardware Co.

NAS1801 and NAS 1802

Screw, Hex Head, Cruciform Recess, Full Thread, 160,000 PSI Tensile Minimum

Alloy Steel and A286 Corrosion Resistant Steel

These replace NAS1096 of same sizes.

Part # GAH-2139

4 way Screwdriver

Small & Handy

MATERIAL:

NAS1801 -- ALLOY STEEL, 160-180 KSI TENSILE STRENGTH

NAS1802 -- CRES-A286, PRECIPITATION HARDENED TO 160-190 KSI

FINISH: CADMIUM PLATE PER QQ-P-416, TYPE II, CLOSE 2, ALL NAS1801, NAS1802 WITH (P) CODE AT END.

PASSIVATE PER QQ-P-35, NAS1802 WITH NO (P) CODE AT END.

CODE:

FIRST DASH NUMBER INDICATES DIAMETER; SECOND DASH NUMBER INDICATES LENGTH IN 1/16 INCH INCREMENTS.

NO LETTER AFTER FIRST DASH NUMBER INDICATES UNDRILLED HEAD.

LETTER “D” AFTER FIRST DASH NUMBER INDICATES DRILLED HEAD (-3 THRU -6 SIZES ONLY).

LETTER “P” FOLLOWING SECOND DASH NUMBER INDICATES CADMIUM PLATE (NAS1802 ONLY).

EXAMPLE OF PART NUMBERS:

NAS1801-4-16

= 1/4 - 28, SCREW, ONE INCH LONG, ALLOY STEEL

NAS1801-04-12

= 4 - 40, SCREW, .750 INCH LONG, ALLOY STEEL

NAS1802-4-16

= 1/4 - 28 UNJF-3A SCREW, 1.000 LONG, PASSIVATED, STEEL

NAS1802-4D16P

= 1/4 - 28 UNJF-3A SCREW, DRILLED HEAD, 1.000 LONG, CADMIUM PLATED, A286 MATERIAL

42

Documents in this book for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.

All Original Text, Tables and Drawings are Copyright © by Genuine Aircraft Hardware Co. 2005

Share Link: