Mechanical Dimensions (mm)
Pin Out
Pad
Function
1
Cathode
2
Anode
3
Anode
4
Cathode
5 [2]
Thermal
1
2
5
4
3
Figure 1: Package outline drawing.
Notes for Figure 1:
1. Unless otherwise noted, the tolerance = ± 0.20 mm.
2. Thermal contact, Pad 5, is electrically connected to the Anode, Pads 2 and 3. Do not connect any pad to the thermal contact, Pad # 5. When mounting the
LZ1-00G100 onto a MCPCB, by default its dielectric layer provides for the necessary electrical insulation in between all contact pads. LED Engin offers LZ1-
10G100 and LZ1-30G100 MCPCB options which provide for electrical insulation between all contact pads. Please refer to Application Note MCPCB Option 1
and Option 3, or contact a LED Engin sales representative for more information.
Recommended Solder Pad Layout (mm)
Figure 2: Recommended solder mask opening (hatched area) for anode, cathode, and thermal pad.
Note for Figure 2:
1. Unless otherwise noted, the tolerance = ± 0.20 mm.
COPYRIGHT © 2015 LED ENGIN. ALL RIGHTS RESERVED.
LZ1-00G100 (5.5 – 02/06/15)
6
LED Engin | 651 River Oaks Parkway | San Jose, CA 95134 USA | ph +1 408 922 7200 | fax +1 408 922 0158 | em sales@ledengin.com | www.ledengin.com