DGP30 Просмотр технического описания (PDF) - Power-One Inc.

Номер в каталоге

Компоненты Описание

производитель

DGP30

DGP30 SERIES SINGLE OUTPUT

Power-One Inc. 

DGP30 SERIES – SINGLE OUTPUT

NOTES

(1) All parameters measured at Tc=25 °C case temperature, nominal input voltage and full rated load

unless otherwise noted. Refer to the Technical Reference Section for definition of terms,

measurement circuits and other information.

(2) Minimum load required for rated regulation only. Module will not be damaged if run at less than

minimum load.

(3) Short term stability is specified after a 30 minute warm-up at full load, and with constant line, load

and ambient conditions.

(4) The input ripple rejection is specified for DC to 120Hz ripple with a modulation amplitude of 1% Vin.

(5) Noise is measured per Technical Reference Section. Output noise is measured with a 1µF tantalum

capacitor connected 1” from the output pins.

For the Most Up-To-Date Information

www.power-one.com

24 Hours/Day—7 Days/Week

NUCLEAR AND MEDICAL APPLICATIONS Power-One products are not authorized for use as critical components in life support systems, equipment used in hazardous environments,

or nuclear control systems without the express written consent of the President of Power-One, Inc.

TECHNICAL REVISIONS The appearance of products, including safety agency certifications pictured on labels, may change depending on the date manufactured. Specifications are

subject to change without notice.

2

Share Link: