DGP30 Просмотр технического описания (PDF) - Power-One Inc.

Номер в каталоге

Компоненты Описание

производитель

DGP30

DGP30 SERIES SINGLE OUTPUT

Power-One Inc. 

DGP30 SERIES

SINGLE OUTPUT

DESCRIPTION

The single output DGP30 Series is designed to accept an extended

2:1 input voltage range for use in industrial and telecom

applications. The output of the converter is electrically isolated,

thereby allowing the output to be configured as a positive or

negative output voltage. For additional system utility output Trim

and Remote ON/OFF are featured. Overcurrent protection,

overtemperature protection, and output overvoltage transient

protection allow safe, reliable operation.

FEATURES

• Remote ON/OFF and TRIM

• Low OFF Current

• Overcurrent and Overtemperature Protection

• Efficiencies to 86%

• Transient Output Overvoltage Protection

• 1544V Isolation

• Five-Side Shielded Case

• Extended Range Input (2:1)

BOTTOM VIEW

2.02

(51.31)

SIDE VIEW

0.040 (1.02) DIA

6 PLACES

0.700

(17.78)

0.600

1

(15.24)

0.400

2

(10.16)

0.300

(7.62)

0.000

3

0.100

(2.54)

0.31

(7.9)

5

1.62

6 (41.15)

7

Mechanical tolerances unless otherwise noted:

X.XX dimensions: ±0.020 inches

X.XXX dimensions: ±0.005 inches

Rev. 04/2000

NOTES

(1) All parameters measured at Tc = 25°C, nominal input voltage and full rated load unless otherwise noted.

Refer to the Technical Reference Section for the definition of terms, measurement circuits and other

information.

(2) ON/OFF pin is referenced to pin 2, -Input. See DGP30 Series Application Notes for the specific

requirements of this feature.

(3) The Case is electrically connected to Pin 1, +Input.

(4) Full output trim range may not be available at minimum input voltage and full load. Full trim is

guaranteed from minimum input voltage, plus 5%, and full load.

(5) The case thermal impedance is specified as the case temperature rise over ambient per package watt

dissipated.

1

Share Link: