MAP140-1024 Просмотр технического описания (PDF) - Power-One Inc.
Номер в каталоге
Компоненты Описание
производитель
MAP140-1024 Datasheet PDF : 4 Pages
| |||
MAP140 AC-DC Series Data Sheet
Safety, Regulatory, and EMI Specifications
PARAMETER
Agency Approvals
Dielectric Withstand Voltage
Electromagnetic
Interference, Conducted
ESD Susceptibility
Radiated Susceptibility
EFT/Burst
Input Transient Protection
CONDITIONS/DESCRIPTION
UL1950.
CSA 22.2 No. 234/950.
EN60950 (TÜV).
Input to output, 1 second.
FCC CFR title 47 part 15 sub-part B - conducted & radiated.
EN55022 / CISPR 22 conducted.
Per EN61000-4-2, level 4.
Per EN61000-4-3, level 3.
Per EN61000-4-4, level 3.
Per EN61000-4-5, class 3.
Insulation Resistance
Leakage Current
Input to Output.
Per EN60950, 264VAC.
Line to Line
Line to Ground
110 VAC
264 VAC
Environmental Specifications
PARAMETER
Altitude
Operating Temperature
CONDITIONS/DESCRIPTION
Operating.
Non-operating.
Derate linearly above 50°C by 2.5% per °C
Storage Temperature
Temperature Coefficient
Relative Humidity
Shock
Vibration
0°C to 70°C (after 15 minute warm-up period).
Non-condensing.
Operating, peak acceleration.
Random vibration, 10Hz to 2kHz, 3 axis.
At 100% load:
At 50% load:
MIN
2600
B
B
8
10
±2
1
2
10
NOM
MAX
Approved
0.5
1.5
UNITS
VDC
Class
kV
V/M
kV
kV
M⍀
mA
MIN
NOM
MAX
UNITS
10k ASL Ft.
40k ASL Ft.
0
50
°C
0
70
°C
-40
85
°C
±0.02 ±0.05 %/°C
95
%RH
20
GPK
6
GRMS
Options
DESCRIPTION
L-Bracket
Cover
Power Fail Signal
Thermal Shutdown
NOTES
DIMENSIONS
Add ‘L’ suffix to model number.
7.19" x 4.50" x 2.40"
(182.6mm x 114.3mm x 61.0mm)
Add ‘C’ suffix to model number. Includes L-Bracket.
For convection cooled applications, derate output power to 75 watts, maximum.
7.19" x 4.50" x 2.40"
(182.6mm x 114.3mm x 61.0mm)
Add ‘P’ suffix to model number. Provides 2.3mS warning time before main output
drops 5%. Warning time increases at reduced load levels. Option available only
N/A
on MAP140-1012 and MAP140-1024. Power fail is standard on MAP140-3000P.
Add ‘T’ suffix to model number. Initiates shut-down in the event of an overtemperature
N/A
condition. Automatic recovery. Where available, Power Fail signal is initiated prior to shutdown.
MAY 31, 2006 revised to JUL 14, 2006
Page 3 of 4
www.power-one.com
Share Link: 