EMC1404 Просмотр технического описания (PDF) - Microchip Technology

Номер в каталоге

Компоненты Описание

производитель

EMC1404

1°C Temperature Sensor with Beta Compensation

Microchip Technology 

1°C Temperature Sensor with Beta Compensation

Data Sheet

Chapter 3 Electrical Specifications

3.1

Absolute Maximum Ratings

Table 3.1 Absolute Maximum Ratings

DESCRIPTION

RATING

Supply Voltage (VDD)

Voltage on 5V tolerant pins (V5VT_pin)

Voltage on 5V tolerant pins (|V5VT_pin - VDD|) (see Note 3.1)

Voltage on any other pin to Ground

Operating Temperature Range

Storage Temperature Range

Lead Temperature Range

Package Thermal Characteristics for MSOP-10

Thermal Resistance (j-a)

Package Thermal Characteristics for SOIC-14

Thermal Resistance (j-a)

Package Thermal Characteristics for DFN-10

Thermal Resistance (j-a)

ESD Rating, All pins HBM

-0.3 to 4.0

-0.3 to 5.5

-0.3 to 3.6

-0.3 to VDD +0.3

-40 to +125

-55 to +150

Refer to JEDEC Spec. J-STD-020

132.2

77.7

77.1

2000

UNIT

V

V

V

V

°C

°C

°C/W

°C/W

°C/W

V

Note: Stresses at or above those listed could cause permanent damage to the device. This is a stress

rating only and functional operation of the device at any other condition above those indicated

in the operation sections of this specification is not implied. When powering this device from

laboratory or system power supplies, it is important that the Absolute Maximum Ratings not be

exceeded or device failure can result. Some power supplies exhibit voltage spikes on their

outputs when the AC power is switched on or off. In addition, voltage transients on the AC

power line may appear on the DC output. If this possibility exists, it is suggested that a clamp

circuit be used.

Note 3.1 For the 5V tolerant pins that have a pull-up resistor (SMCLK, SMDATA, THERM, and

ALERT), the pull-up voltage must not exceed 3.6V when the device is unpowered.

 2014 Microchip Technology Inc.

DS20005272A-page 11

Share Link: