TIS300(2013) Просмотр технического описания (PDF) - TRACO Electronic AG
Номер в каталоге
Компоненты Описание
производитель
TIS300 Datasheet PDF : 13 Pages
| |||
DC-UPS-System
Industrial Power Supplies
TIS Series
50–600 Watt
In addition to the standard power supply function, these models
include a professional battery management system to charge and
monitor an external battery. In the event of a power failure the
battery is switched automatically and without any interruption to
the DC output. Once mains power is available again, the battery
is switched off. The backup time is limited only by battery capacity
and load. Charge current and voltage can be adjusted to values as
required by battery type. Power fail and low battery alarm signals
are available via two independent relay contacts. During normal
operation the battery status is monitored by periodically loading
the battery for a short time. If a cell resistance is high, there is a
relay alarm is available. The battery is fully protected under any
operational conditions. The power supply is short circuit protected
even in battery backup operation but, for safety reasons, the bat-
tery should be fitted with a fast blow fuse. Battery mode can be
activated by interconnecting pin 7 and 8.
Complete external battery packs (3.2 Ah or 7 Ah standard) with lead batteries and circuit breaker are available (see page 8).
Models
Order Code 1)
Input Voltage
TIS 300-124 UDS
TIS 600-124 UDS
115/230 VAC
selectable
115/230 VAC
selectable
1) Includes terminal plugs, does not include batteries
2) reduce max. output current by battery charging current
Output Power
max.
300 W
600 W
Output Voltage
nom.
24 VDC
24 VDC
Output Current 2)
max.
12 A
24 A
http://www.tracopower.com
Page 6 of 13
Share Link: 