LPS300 Просмотр технического описания (PDF) - Vishay Semiconductors
Номер в каталоге
Компоненты Описание
производитель
LPS300 Datasheet PDF : 5 Pages
| |||
www.vishay.com
OVERLOADS
In any case the applied voltage must be lower than
UL = 5000 V.
Short time overload: 4 x Pr/10 s
Accidental overload: The values indicated on the following
graph are applicable to resistors in air or mounted onto a
heatsink.
ENERGY CURVE
10 000
1000
100
10
1
0.1
0.0001 0.001 0.01 0.1
1
10 100
OVERLOAD DURATION IN ms
1000
POWER CURVE
10 000
1000
100
10
1
0.0001 0.001 0.01 0.1
1
10 100
OVERLOAD DURATION IN ms
1000
LPS 300
Vishay Sfernice
MARKING
Series, style, ohmic value (in ), tolerance (in %),
manufacturing date, Vishay Sfernice trademark.
POWER RATING
The temperature of the case should be maintained within the
limits specified in the following figure.
To optimize the thermal conduction, contacting surfaces
should be coated with silicone grease or thermal film, and
heatsink mounting screws tightened to 2 Nm.
100
80
60
40
20
0
0
50
85 100 120
150
200
BOTTOM CASE TEMPERATURE IN °C
PACKAGING
Box of 15 units
Revision: 05-Jun-2019
3
Document Number: 50052
For technical questions, contact: sferfixedresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Share Link: 