HAL101 Просмотр технического описания (PDF) - Micronas
Номер в каталоге
Компоненты Описание
производитель
HAL101 Datasheet PDF : 12 Pages
| |||
HAL 1xy
2.2. Positions of Sensitive Areas
SOT89B-3
y 0.95 mm nominal
A4 0.33 mm nominal
TO92UA-6
1.08 mm nominal
0.30 mm nominal
DATA SHEET
2.3. Absolute Maximum Ratings
Stresses beyond those listed in the “Absolute Maximum Ratings” may cause permanent damage to the device. This
is a stress rating only. Functional operation of the device at these conditions is not implied. Exposure to absolute
maximum rating conditions for extended periods will affect device reliability.
This device contains circuitry to protect the inputs and outputs against damage due to high static voltages or electric
fields; however, it is advised that normal precautions be taken to avoid application of any voltage higher than abso-
lute maximum-rated voltages to this high-impedance circuit.
All voltages listed are referenced to ground (GND).
Symbol
Parameter
VDD
Supply Voltage
VO
Output Voltage
IO
Continuous Output On Current
TJ
Junction Temperature Range
1)
2)
as
t<
long as
1000 h
TJmax
is
not
exceeded
Pin Name
1
3
3
Min.
−15
−0.3
−
−40
Max.
281)
281)
501)
1402)
Unit
V
V
mA
°C
2.4. Recommended Operating Conditions
Functional operation of the device beyond those indicated in the “Recommended Operating Conditions/Characteris-
tics” is not implied and may result in unpredictable behavior, reduce reliability and lifetime of the device.
All voltages listed are referenced to ground (GND).
Symbol Parameter
Pin Name Min. Max. Unit
VDD
Supply Voltage
1
IO
Continuous Output on Current 3
VO
Output Voltage
3
(output switched off)
3.8 24
V
0
20
mA
0
24
V
Comment
8
April 8, 2009; DSH000150_001EN
Micronas
Share Link: 