SAW Bandpass Filter F7751
Specifications
Fc = 775.5 MHz
Terminating source impedance : 50Ω
Terminating load impedance : 50Ω
Center Frequency ( Fc )
Insertion Loss (In Fc +/- 9.5 MHz)
Amplitude Ripple (In Fc +/- 9.5 MHz)
Group Delay Variation (In Fc +/- 9.5 MHz)
VSWR (In Fc +/- 9.5 MHz)
Relative Attenuation
… ~ Fc – 35 MHz
Fc + 70 MHz ~ …
Temperature Coefficient of Frequency
Minimum
-
-
-
-
-
Typical
775.5
3.5
1.0
30
1.5
Maximum
-
4.0
2.0
-
2.0
Unit
MHz
dB
dBp-p
nsec
45.0
50.0
45.0
50.0
-
- 80
-
dB
-
-
ppm/℃
Notes :
1) All specifications are based on the matching schematic shown below, measured by Agilent Network analyzer and
full 2 port calibration.
2) Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing
tolerances
3) All attenuation measurements are measured relative to insertion loss
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Part No.
Rev. Date
Rev.
F7751
2009-10-20
NS9003-AS01
2/7