DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

ENH050Q1-650 Просмотр технического описания (PDF) - White Electronic Designs => Micro Semi

Номер в каталоге
Компоненты Описание
производитель
ENH050Q1-650
White-Electronic
White Electronic Designs => Micro Semi White-Electronic
ENH050Q1-650 Datasheet PDF : 21 Pages
First Prev 11 12 13 14 15 16 17 18 19 20
White Electronic Designs
Display Systems Division
ENH050Q1-320/450/600
Precautions in Adjusting Module
Variable resistor on the rear face of the module has
been adjusted optimally before shipmetn. Therefore, do
not change any adjusted values. If adjusted values are
changed, the specifications described here may not be
satisfied.
Caution of Product Design
1. The LCD module shall be protected against water by
the waterproof cover.
Others
1. Do not expose the module to direct sunlight or
intensive ultraviolet rays for many hours; liquid crystal
is deteriorated by ultraviolet rays.
2. Store the module at a temperature near room
temperature. When stored at lower than the rated
storage temperature, liquid crystal solidifies, causing
the panel to be damaged. When stored at higher than
the rated storage temperature, liquid crystal turns into
isotropic liquid and may not recover.
3. If LCD panel breaks, the liquid crystal could possibly
escape from the panel. Since the liquid crystal is
injurious, avoid contact with the eyes or mouth. Wash
with soap immediately if contact with the liquid crystal
occurs.
4. Observe all other precautionary requirements in
handling general electronic components.
SHIPPING REQUIREMENTS
Carton storage conditions:
Number of layers of carton in stack: 10 layers max
Environmental conditions:
Temperature:
0~40°C
Humidity:
60%RH or less (at 40°C)
No dew condensation at low temperature and high
humidity,
Atmosphere
Harmful gases such as acid and
alkali which corrode electronic
components and wires must not
be present.
Storage period
Approximately 3 months
Opening of package
To prevent TFT-LCD module from
being damaged by static electricity,
adjust the room humidity to 50%RH
of higher and make certain one is
grounded before opening the
package.
RELIABILITY TEST
Reliability test conditions for the TFT-LCD module are
shown on page 12.
and should be strictly avoided. Image retention may occur
when a fixed pattern is displayed for a long time.
White Electronic Designs Corp. reserves the right to change products or specifications without notice.
Original specifications created by Sharp.
August 2003
Rev. 0
11
Display Systems Division • Hillsboro, OR • (503) 690-2460 • www.wedc.com

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]