S1D13L03F00A100 Просмотр технического описания (PDF) - Seiko Epson Corp

Номер в каталоге

Компоненты Описание

производитель

S1D13L03F00A100

WVGA Graphics Controller

Seiko Epson Corp 

S1D13L03

 DESCRIPTION

Integrated Frame Buffer

• Embedded 768K byte SRAM display buffer.

Digital Video

• RGB: 8:8:8, 6:6:6, 5:6:5

(8:8:8 will be truncated to 16 or 18 bpp).

CPU Interface

• 8/16-bit Intel 80 interface (used for display or register

data).

• Chip select is used to select device. When inactive, any

input data/command will be ignored.

Panel Support

• Active Matrix TFT interface.

• 18-bit interface.

• Supports resolutions up to 800x480.

Display Features

• 16/18 bit-per-pixel (bpp) color depths.

• 16 bpp to 18 bpp Input Data conversion.

• All display writes are handled by window apertures/position

for complete or partial display updates. All window

coordinates are referenced to top left corner of the displayed

image.

• Double-Buffer available to prevent image tearing during

streaming input. Resolutions supported must fit inside 384k

bytes (1/2 of total available display buffer). Typical resolution

of 352x416.

Miscellaneous

• Internal programmable PLL.

• Single MHz clock input: CLKI.

• CLKI available as CLKOUT (separate CLKOUTEN pin

associated with output).

• Hardware / Software Power Save mode.

• Input pin to Enable/Disable Power Save Mode.

• General Purpose Input/Output pins are available

(GPIO[7:0]).

• COREVDD 1.5 volts and IOVDD 1.65 ~ 3.6 volts

• QFP21 176-pin package

NOTICE:

No part of this material may be reproduced or duplicated in any form or by any means without the written permission of Seiko Epson.

Seiko Epson reserves the right to make changes to this material without notice. Seiko Epson does not assume any liability of any kind

arising out of any inaccuracies contained in this material or due to its application or use in any product or circuit and, further, there is no

representation that this material is applicable to products requiring high level reliability, such as, medical products. Moreover, no license to

any intellectual property rights is granted by implication or otherwise, and there is no representation or warranty that anything made in

accordance with this material will be free from any patent or copyright infringement of a third party. When exporting the products or

technology described in this material, you should comply with the applicable export control laws and regulations and follow the procedures

required by such laws and regulations. You are requested not to use, to resell, to export and/or to otherwise dispose of the products (and

any technical information furnished, if any) for the development and/or manufacture of weapon of mass destruction or for other military

purposes.

All brands or product names mentioned herein are trademarks and/or registered trademarks of their respective companies.

MICRODEVICES OPERATIONS DIVISION

IC Sales & Marketing Department

421-8 Hino, Hino-shi, Tokyo 191-8501, JAPAN

Phone: +81-42-587-5814 FAX: +81-42-587-5117

EPSON semiconductor website

http://www.epson.jp/device/semicon_e/

Document code: 412705800

First issue February, 2014 in Japan

2

Share Link: