MCS0402MC1202FE000 Просмотр технического описания (PDF) - Vishay Semiconductors

Номер в каталоге

Компоненты Описание

производитель

MCS0402MC1202FE000

Precision Thin Film Chip Resistors

Vishay Semiconductors 

MCS 0402, MCT 0603, MCU 0805, MCA 1206 - Precision

www.vishay.com

Vishay Beyschlag

TESTS AND REQUIREMENTS

All tests are carried out in accordance with the following

specifications:

EN 60115-1, generic specification

EN 60115-8 (successor of EN 140400), sectional

specification

EN 140401-801, detail specification

IEC 60068-2-xx, test methods

The components are approved under the IECQ-CECC

quality assessment system for electronic components.

The parameters stated in the Test Procedures and

Requirements table are based on the required tests and

permitted limits of EN 140401-801. The table presents only

the most important tests, for the full test schedule refer to

the documents listed above. However, some additional

tests and a number of improvements against those

minimum requirements have been included.

The testing also covers most of the requirements specified

by EIA/ECA-703 and JIS-C-5201-1.

The tests are carried out under standard atmospheric

conditions in accordance with IEC 60068-1, 4.3, whereupon

the following values are applied:

Temperature: 15 °C to 35 °C

Relative humidity: 25 % to 75 %

Air pressure: 86 kPa to 106 kPa (860 mbar to 1060 mbar)

A climatic category LCT / UCT / 56 is applied, defined by the

lower category temperature (LCT), the upper category

temperature (UCT), and the duration of exposure in the

damp heat, steady state test (56 days).

The components are mounted for testing on printed circuit

boards in accordance with EN 60115-8, 2.4.2, unless

otherwise specified.

TEST PROCEDURES AND REQUIREMENTS

EN

60 115-1

CLAUSE

IEC

60 068-2 (1)

TEST

METHOD

TEST

PROCEDURE

Stability for product types:

MCS 0402

MCT 0603

MCU 0805

4.5

4.8

4.25.1

4.25.3

4.24

-

-

-

-

78 (Cab)

MCA 1206

Resistance

-

Temperature

coefficient

At (20 / - 10 / 20) °C and

(20 / 85 / 20) °C

At (20 / - 55 / 20) °C and

(20 / 125 / 20) °C

Endurance

at 70 °C:

precision

operation mode

U = P70 x R or U = Umax.;

whichever is the less

severe;

1.5 h on; 0.5 h off;

70 °C; 1000 h

Endurance

at 70 °C:

standard

operation mode

70 °C; 8000 h

U = P70 x R or U = Umax.;

whichever is the less

severe;

1.5 h on; 0.5 h off;

70 °C; 1000 h

70 °C; 8000 h

Endurance at

upper category

temperature

85 °C; 1000 h

125 °C; 1000 h

Damp heat,

steady state

(40 ± 2) °C; 56 days;

(93 ± 3) % RH

REQUIREMENTS

PERMISSIBLE CHANGE (R)

STABILITY CLASS 0.1

STABILITY CLASS 0.25

100  to 10 k

> 10 kto 221 k

100  to 10 k

39  to < 100 ;

> 10 k to 511 k

100  to 47.5 k

39  to < 100 ;

> 47.5 k to 1.5 M

47  to 332 k

39  to < 47 ;

> 332 k to 2 M

± 0.1 % R; ±0.25 % R

± 25 ppm/K; ± 15 ppm/K;

± 10 ppm/K

-

-

± 25 ppm/K; ± 15 ppm/K;

± 10 ppm/K

± (0.05 % R + 0.02 )

±(0.1 % R + 0.02 )

± (0.1 % R + 0.02 )

±(0.25 % R + 0.05 )

±(0.1 % R + 0.02 )

± (0.2 % R + 0.02 )

± (0.2 % R + 0.02 )

±(0.25 % R + 0.05 )

± (0.1 % R + 0.02 )

±(0.25 % R + 0.05 )

Revision: 16-Aug-16

6

Document Number: 28700

For technical questions, contact: thinfilmchip@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Share Link: