MH8910-1AP Просмотр технического описания (PDF) - Mitel Networks
Номер в каталоге
Компоненты Описание
производитель
MH8910-1AP Datasheet PDF : 26 Pages
| |||
MT8910-1
Preliminary Information
Superframe
12 ms
Frame 1 Frame 2 Frame 3 Frame 4 Frame 5 Frame 6 Frame 7 Frame 8
1.5 ms
Frame
SW 2B + D 2B + D 2B + D 2B + D 2B + D 2B + D 2B + D 2B + D 2B + D 2B + D 2B + D 2B + D M
Information
Channels
B11 B12 B13 B14 B15 B16 B17 B18 B21 B22 B23 B24 B25 B26 B27 B28 D1 D2
50 µs
50 µs
12.5 µs
Corresponding
ST-BUS
B7 B6 B5 B4 B3 B2 B1 B0 B7 B6 B5 B4 B3 B2 B1 B0 D0 D1
Figure 4 - Frame Structure
Basic Frame Synchronization (BFS) is achieved
using the algorithm shown in Figure 5. The DSLIC
searches for the sync word or the inverted sync word
within the received data stream. After detecting
three consecutive synchronization patterns spaced
exactly 120 quats apart, the DSLIC declares terminal
synchronization by setting the bits of the Internal
State Indicator to 111 in Status Register 1. A loss of
synchronization is declared by the DSLIC when at
least one of the nine quats at the beginning of each
Basic Frame differs by more than one quantization
level for two consecutive frames.
A search for superframe synchronization will begin
only after Basic Frame sync has been found. The
DSLIC will declare superframe sync (SFS) on the
first occurrence of the properly spaced Inverted Sync
Word (ISW) once Basic Frame sync has been
acquired. The synchronized state is identified by the
status of internal state bits IS2, IS1 and IS0 found in
Status Register 1.
The DSLIC will lose superframe sync under three
conditions;
1) if the DSLIC loses basic frame sync,
2) if the ISW does not occur exactly eight basic
frames apart,
3) if the ISW is received when it is not expected.
Activation/Deactivation
The DSLIC has a complete activation/deactivation
state machine which allows the user to activate or
deactivate the link as per the requirements in the
STATE : LOST
BFS : 0
One
Valid
SW
Error in
SW
> One-Level Error in SW
Error in
SW
STATE : LOSING
BFS : 1
STATE : SENSING1
BFS : 0
One
Valid
SW
Valid
SW
> One-Level
Error in SW
STATE : SENSING2
BFS : 0
One Valid SW
STATE : SYNC
BFS : 1
Figure 5 - Frame Synchronization State Diagram
9-8
Share Link: 