WD-30-B Просмотр технического описания (PDF) - Unspecified
Номер в каталоге
Компоненты Описание
производитель
WD-30-B Datasheet PDF : 48 Pages
| |||
LONG & SHORT NOSE PLIERS
JIC-842
BLONGNOSE
ELONGNOSE
BSHORTNOSE
TELECOM LONG NOSE D PLIERS
Pliers are for general use looping, bending and cutting. Grips
small wires and parts and reaches into tight spaces. Jaws are
knurled, serrated and have side cutting blades. Cushion
gripped yellow plastic handle.
JONARD
PART NO.
JIC-842
LENGTH
6 3/4”
JAW
LENGTH
1 7/8”
JAW
JAW
WIDTH THICKNESS
11/16”
3/8”
CUTTER
LENGTH
1/2”
LONG NOSE GENERAL USE PLIERS
Chain nose pliers for general use. Inner surface of the jaws
are knurled near the end to facilitate gripping wire, binding
post nuts etc. Orange plastic handle.
JONARD LENGTH
PART NO.
BLONGNOSE 6 7/8”
JAW
LENGTH
1 1/2”
JAW
JAW
WIDTH THICKNESS
3/4”
3/8”
LONG NOSE GRIPPING PRESSING PLIERS
Long nose pliers for gripping and pressing. Inner surface of
the jaws are knurled near the end to facilitate gripping wire,
binding post nuts etc. Aluminum oxide insulation coating on
the outside nose surface. The inside gripping jaws are
provided with mated grooves near the joint for use in
pressing .032/.035” brass sleeves. One stripping hole .054”
diameter Orange plastic handle.
JONARD LENGTH
PART NO.
ELONGNOSE 6 7/8”
JAW
LENGTH
1 7/8”
JAW
JAW
WIDTH THICKNESS
11/16”
3/8”
SHORTNOSE PLIERS
Intended for use in skinning 22-24 AWG wire and crushing
insulation in nose slot. The front portion of the jaws is
narrowed, and a portion of the inner face of one jaw is
relieved to skin insulation from wire. The inner surface of
the jaws are serrated to facilitate gripping wire. Orange
plastic handle.
JONARD LENGTH
PART NO.
BSHORTNOSE 6 1/2”
JAW
LENGTH
1 1/2”
JAW
JAW
WIDTH THICKNESS
3/4”
3/8”
Phone: (914) 793-0700 • Fax: (914) 793-4527 • sales@jonard.com
INDUSTRIES CORP.
7
Share Link: 