µPC1892
MODE SELECT CODE
Select among OFF, Movie, Music and Simulated mode by MS1 and MS2 (Pins 7 and 8).
Code
Mode
OFF
Music
Movie
Simulated
MS1
(Pin 7)
L
H
L
H
MS2
(Pin 8)
L
L
H
H
Cautions 1. In the case of changing surround mode and power ON/OFF, mute (approx. 200 ms) must be used for pop
noise reduction.
2. Insert resistors between mode select pins (pin 7, 8) and GND, between control pins (pin 16, 17, 18, 19, 20,
23) and GND.
3. Connect a electrolytic capacitor for power supply as close as possible to VCC (pin 1).
Remark About "H" and "L", refer to RECOMMENDED OPERATING CONDITIONS.
5