UGN3275 Просмотр технического описания (PDF) - Allegro MicroSystems
Номер в каталоге
Компоненты Описание
производитель
UGN3275 Datasheet PDF : 4 Pages
| |||
Dimensions in Inches
(controlling dimensions)
0.208
0.203
45°
0.063
0.059
3275
COMPLEMENTARY-OUTPUT
HALL-EFFECT LATCH
Dimensions in Millimeters
(for reference only)
5.28
5.16
45°
1.60
1.50
0.138
0.133
0.085 1
2
3
4
MAX
0.600
0.560
SEE NOTE
0.0189
0.0142
0.050
BSC
45°
0.033
0.0173
0.0138
Dwg. MH-009D in
3.51
3.38
2.16 1
2
3
4
MAX
15.24
14.23
SEE NOTE
0.48
0.36
1.27
BSC
NOTES: 1. Tolerances on package height and width represent allowable mold offsets.
Dimensions given are measured at the widest point (parting line).
2. Exact body and lead configuration at vendor’s option within limits shown.
3. Height does not include mold gate flash.
4. Recommended minimum PWB hole diameter to clear transition area is 0.035” (0.89 mm).
5. Where no tolerance is specified, dimension is nominal.
45°
0.84
0.44
0.35
Dwg. MH-009D mm
The products described herein are manufactured under one or more of the following U.S. patents: 5,045,920; 5,264,783; 5,442,283;
5,389,889; 5,581,179; 5,517,112; 5,619,137; 5,621,319; 5,650,719; 5,686,894; 5,694,038; 5,729,130; 5,917,320; and other patents pending.
Allegro MicroSystems, Inc. reserves the right to make, from time to time, such departures from the detail specifications as may be required to
permit improvements in the performance, reliability, or manufacturability of its products. Before placing an order, the user is cautioned to verify
that the information being relied upon is current.
Allegro products are not authorized for use as critical components in life-support appliances, devices, or systems without express written
approval.
The information included herein is believed to be accurate and reliable. However, Allegro MicroSystems, Inc. assumes no responsibility for its
use; nor for any infringements of patents or other rights of third parties that may result from its use.
Share Link: 