XE1486 Просмотр технического описания (PDF) - Xecom

Номер в каталоге

Компоненты Описание

производитель

XE1486

Compact 14,400 BPS Fax and Data Modem

Xecom 

XE1486 AT Command List (continued)

&Sn - DSR Operation

n=0 DSR always active*

n=1 DSR in accordance with V.25.

&Tn - Test Modes

n=0 Exit test mode

n=1 Local analog loopback

n=3 Initiate local digital loopback

n=4 Respond to remote loop request*

n=5 Deny remote loop request

n=6 Initiate a Remote Digital loopback

n=7 Remote digital loopback w self-test

n=8 Local analog loopback w self-test

&Vn - View Configuration Profiles

n=0 View active profile & user profile 0*

n=1 View active profile & user profile 1

&Wn - Store Active Profile

n=0 Store active profile as profile 0*

n=1 Store active profile as profile 1

&Yn Default profile after reset.

n=0 Reset to Profile 0*

n=1 Reset to Profile 1

&Zn=x - Store number "x" in memory location "n"

%En - Line Quality Monitor/Auto Retrain

n=0 Disabled

n=1 Enabled

n=2 Enable line quality and fallback / fall forward

%L - Read Received Signal Level

%Q - Read Line Signal Quality

\An - MNP Block Size

n=0 Maximum 64 characters

n=1 Maximum 128 characters

n=2 Maximum 192 characters

n=3 Maximum 256 characters*

\Bn - Transmit Break

\Gn - Set Modem Port Flow Control

n=0 Disables port flow control*

n=1 XON/XOFF port flow control

\Jn - DTE Rate Adjust

n=0 Serial port speed independent of link speed*

n=1 Serial port automatically set to link speed*

Kn - Break control

Break received from host with Reliable link.

n=0 Enter on-line command mode; do not transmit

break

n=1 Purge buffers, immediately transmit break

n=2 Same as n=0

n=3 Immediately send break

n=4 same as n=0

n=5 Send break in sequence with buffered data*

Break received from host with Direct link.

n=0 Immediately transmit break, then enter on-line

command mode

n=1 Immediately send break

n=2 Enter command mode; do not transmit break

n=3 same as n=1

n=4 same as n=0

n=5 same as n=1*

Break received from modem with Normal link.

n=0 Purge buffers, Immediately send break

n=1 same as n=0

n=2 Immediately send break to the host

n=3 Same as n=2

n=4 Send break to host in sequence with data.

n=5 Same as n=2*

Host initiates break (AT\B); Reliable link.

n=0 Purge buffers; immediately transmit break

n=1 Same as n=0

n=2 Immediately transmit break

n=3 Same as n=1

n=4 Transmit break in sequence w data

n=5 Same as n=4*

\Nn - Error Control Selection

n=0 Normal mode, no error correction

n=1 Direct mode, no buffering or error correction

n=2 Reliable mode, LAPM or MNP required

n=3 V.42 Auto-reliable mode *

n=4 V.42 Reliable mode, LAPM required

n=5 MNP Reliable mode, MNP required

-Kn - MNP Extended Services

n=0 No LAPM to MNP10 conversion

n=1 LAPM to MNP10 conversion*

n=2 LAPM to MNP10 conversion; no initiation of

MNP Extended Service during V.42 LAPM

answer mode detection.

XECOM

(8)

XE1486

Share Link: