Electrical characteristics
TS4999
Table 9. VCC = +3.6V, GND = 0V, Tamb = 25°C (unless otherwise specified) (continued)
Symbol
Parameter
Conditions
Min. Typ. Max. Unit
tSTBY Standby time
Standby time(2)
10 13.8 18 ms
VN Output voltage noise
F = 20Hz to 20kHz, A-Weighted,
Gain = 3.5dB
Filterless, 3D effect off, RL = 4Ω
Filterless, 3D effect on, RL = 4Ω
With LC output filter, 3D effect off, RL = 4Ω
With LC output filter, 3D effect on, RL = 4Ω
Filterless, 3D effect off, RL = 8Ω
Filterless, 3D effect on, RL = 8Ω
With LC output filter, 3D effect off, RL = 8Ω
With LC output filter, 3D effect on, RL = 8Ω
29
49
28
μVRMS
48
29
50
29
50
1. Dynamic measurements - 20*log(rms(Vout)/rms(Vripple)). Vripple is the super-imposed sinus signal to VCC at f = 217 Hz
with fixed Cin cap (input decoupling capacitor).
2. See Section 4.6: Wakeup (tWU) and shutdown (tSTBY) times on page 26.
10/36