TEN30-2409 Просмотр технического описания (PDF) - Traco Power
Номер в каталоге
Компоненты Описание
производитель
TEN30-2409 Datasheet PDF : 4 Pages
| |||
DC/DC Converters
TEN 30 Series, 30 Watt
General Specifications
Capacitive load (max.)
1.5 / 2.5 / 3.3 Vout models:
5.1 Vout models:
12 Vout models:
15 Vout models:
±5 Vout models:
±12 Vout models:
±15 Vout models:
20’000 µF
14’400 µF
3’000 µF
2’000 µF
±3’000 µF
±2’000 µF
±1’300 µF
Temperature ranges
– Operating – 40°C to +85°C
– Case temperature +100°C max.
– Storage – 55°C to +125°C
Load derating 3.3 %/K above +60°C
Humidity (non condensing) 5 % to 95 % rel H max.
Thermal inpedance
– Natural convection 12 °C/W
– Natural convection with heat sink 10 °C/W
Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) 550’000 h
Isolation voltage (60 sec.) – Input/Output 1‘500 VDC
Isolation capacitance
– Input/Output 1500 pF max.
Isolation resistance
– Input/Output (500 VDC) >1’000 MOhm
Remote On/Off:
Switching frequency (fixed)
– On: 3 to 12 VDC or open circuit.
– Off: 0 to 1.2 VDC or short circuit pin 3 and pin 2
– Standby current: 3 mA max.
430 kHz typ. (puls width modulation)
Vibration and thermal shock MIL-STD-810E
Safety standards cUL/UL 60950-1, IEC/EN 60950-1
Safety approvals
– UL/cUL www.ul.com -> certifications -> File e188913
– CB test report available for notified bodies on request
Output Voltage Adjustment
Trim up
Trim
Trim down
+Vout
Ru
Nominal output voltage at open Trim input!
Rd
- Vout
Ru [kohm]
output
+5%
+10%
1.5 2.5 3.3V 5.1V 12V 15V
0.56 4.3 6.8 5.1 43 47
0.051 0.33 0.75 0.75 4.3 1.8
Rd [kohm]
Trim
output
–5%
–10%
1.5 2.5 3.3V 5.1V 12V 15V
0.68 6.2 8.2 6.2 56 56
0.062 0.75 0.62 0.82 5.6 2.2
Physical Specifications
Casing material copper, nickel plated
Baseplate non conductive FR4
Potting material epoxy (UL 94V-0 -rated)
Weight 31 g (1.1 oz)
Soldering temperature max. 265°C / 10 sec.
Environmental compliance – Reach www.tracopower.com/products/ten30-reach.pdf
– RoHS RoHS directive 2011/65/EU
Application note: www.tracopower.com/products/ten30-application.pdf
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
http://www.tracopower.com
Page 3 of 4
Share Link: 