DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

TDA9885 Просмотр технического описания (PDF) - Philips Electronics

Номер в каталоге
Компоненты Описание
производитель
TDA9885 Datasheet PDF : 56 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
Philips Semiconductors
I2C-bus controlled single and multistandard
alignment-free IF-PLL demodulators
Product specification
TDA9885; TDA9886
SYMBOL
PARAMETER
CONDITIONS
MIN. TYP. MAX. UNIT
Audio part
Vo(AF)(rms)
THD
BAF(3dB)
S/NW(AF)
αAM(sup)
PSRRAUD
Vo(intc)(rms)
AF output voltage (RMS value)
total harmonic distortion of audio
signal
3 dB AF bandwidth
weighted signal-to-noise ratio of
audio signal
AM suppression of
FM demodulator
power supply ripple rejection on
pin AUD
IF intercarrier output level
(RMS value)
27 kHz FM deviation;
430
50 µs de-emphasis
FM: 27 kHz FM deviation;
50 µs de-emphasis
AM: m = 54 %
without de-emphasis;
80
dependent on FM-PLL filter
FM: 27 kHz FM deviation; 52
50 µs de-emphasis;
vision carrier unmodulated
AM: m = 54 %
45
50 µs de-emphasis;
40
AM: f = 1 kHz and
m = 54 %; referenced to
27 kHz FM deviation
fripple = 70 Hz; see Fig.6
for AM
20
for FM
14
QSS mode; SC1; SC2 off 90
L standard;
90
without modulation
intercarrier mode;
PC/SC1 = 20 dB; SC2 off;
note 6
540 650 mV
0.15 0.50 %
0.5 1.0 %
100
kHz
56
dB
50
dB
46
dB
26
dB
20
dB
140 180 mV
140 180 mV
75
mV
Reference frequency
fref
Vref(rms)
reference signal frequency
reference signal voltage
(RMS value)
note 7
4
operation as input terminal 80
MHz
400 mV
Notes
1. Values of video and sound parameters can be decreased at VP = 4.5 V.
2. For applications without I2C-bus, the time constant (R × C) at the supply must be >1.2 µs (e.g. 1 and 2.2 µF).
3. Condition: luminance range (5 steps) from 0 % to 100 %.
4. AC load: CL < 20 pF and RL > 1 k. The sound carrier frequencies (depending on the TV standard) are attenuated
by the integrated sound carrier traps (see Figs 13 to 18; H (s)is the absolute value of transfer function).
5. S/NW is the ratio of the black-to-white amplitude to the black level noise voltage (RMS value measured on pin CVBS).
B = 5 MHz weighted in accordance with “CCIR 567”.
2003 Oct 02
5

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]