DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

TDA8703 Просмотр технического описания (PDF) - Philips Electronics

Номер в каталоге
Компоненты Описание
производитель
TDA8703 Datasheet PDF : 18 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
Philips Semiconductors
8-bit high-speed analog-to-digital converter
Product specification
TDA8703
LIMITING VALUES
In accordance with the Absolute Maximum Rating System (IEC 134).
SYMBOL
PARAMETER
VCCA
VCCD
VCCO
VCCA VCCD
VCCO VCCD
VCCA VCCO
VVI
VCLK/VCLK
analog supply voltage
digital supply voltage
output stages supply voltage
supply voltage differences
supply voltage differences
supply voltage differences
input voltage range
AC input voltage for switching
(peak-to-peak value)
IO
Tstg
Tamb
Tj
output current
storage temperature
operating ambient temperature
junction temperature
CONDITIONS
referenced to AGND
note 1; referenced to DGND
MIN.
0.3
0.3
0.3
1.0
1.0
1.0
0.3
MAX.
+7.0
+7.0
+7.0
+1.0
+1.0
+1.0
+7.0
2.0
UNIT
V
V
V
V
V
V
V
V
+10 mA
55
+150 °C
0
+70
°C
+125 °C
Notes
1. The circuit has two clock inputs CLK and CLK. There are four modes of operation:
a) TTL (mode 1); CLK decoupled to DGND by a capacitor. CLK input is TTL threshold voltage of 1.5 V and sampling
on the LOW-to-HIGH transition of the input clock signal.
b) TTL (mode 2); CLK decoupled to DGND by a capacitor. CLK input is TTL threshold voltage of 1.5 V and sampling
on the HIGH-to-LOW transition of the input clock signal.
c) AC drive modes (modes 3 and 4); When driving the CLK input directly and with any AC signal of 0.5 V
(peak-to-peak value) imposed on a DC level of 1.5 V, sampling takes place on the LOW-to-HIGH transition of the
clock signal. When driving the CLK input with such a signal, sampling takes place on the HIGH-to-LOW transition.
d) If one of the clock inputs is not driven, then it is recommended to decouple this input to DGND with a 100 nF
capacitor.
HANDLING
Inputs and outputs are protected against electrostatic discharges in normal handling. However, to be totally safe, it is
desirable to take normal precautions appropriate to handling integrated circuits.
THERMAL RESISTANCE
SYMBOL
Rth j-a
PARAMETER
from junction to ambient in free air
SOT101-1
SOT137-1
VALUE
55
75
UNIT
K/W
K/W
1996 Aug 26
6

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]