TC7126 Просмотр технического описания (PDF) - Microchip Technology

Номер в каталоге

Компоненты Описание

производитель

TC7126

3-1/2 Digit Analog-to-Digital Converters

Microchip Technology 

TC7126/A

TABLE 2-1:

Pin Number

(40-Pin PDIP)

Normal

34

35

36

37

38

39

40

PIN FUNCTION TABLE (CONTINUED)

(Reversed) Symbol

Description

(7)

CREF+ A 0.1μF capacitor is used in most applications. If a large Common mode voltage

exists (for example, the VIN- pin is not at analog common) and a 200mV scale is

used, a 1μF capacitor is recommended and will hold the rollover error to 0.5 count.

(6)

VREF- See Pin 36.

(5)

VREF+ The analog input required to generate a full scale output (1999 counts). Place 100mV

between Pins 35 and 36 for 199.9mV full scale. Place 1V between Pins 35 and 36 for

2V full scale. See Section 6.6 “Reference Voltage Selection”, Reference Voltage

for additional information.

(4)

TEST Lamp test. When pulled HIGH (to V+), all segments will be turned on and the display

should read -1888. It may also be used as a negative supply for externally

generated decimal points. See Section 7.4 “TEST (Pin 37)”, TEST for additional

information.

(3)

OSC3 See Pin 40.

(2)

OSC2 See Pin 40.

(1)

OSC1 Pins 40, 39 and 38 make up the oscillator section. For a 48kHz clock (3 readings,

39 per second), connect Pin 40 to the junction of a 180kΩ resistor and a 50pF

capacitor. The 180kΩ resistor is tied to Pin 39 and the 50pF capacitor is tied to

Pin 38.

DS21458C-page 8

© 2006 Microchip Technology Inc.

Share Link: