SW-393
GaAs SPST High Isolation Terminated Switch
0.5 - 2.0 GHz
Electrical Specifications8: TA = 25°C
Parameter
Insertion Loss
Isolation
VSWR
1 dB Compression
Trise, Tfall
Ton, Toff
Transients
Input IP2
Input IP3
Test Conditions
0.5 - 2.0 GHz
0.5 - 1.0 GHz
1.0 - 2.0 GHz
0.5 - 1.5 GHz
0.5 - 2.0 GHz
Input Power, +5 V Control/Supply
0.5 GHz
0.9 GHz
1.5 GHz
10% to 90% RF, 90% to 10% RF
50% Control to 90% RF, Control to 10% RF
In-Band
2-Tone, 5 MHz spacing, +10 dBm each
0.5 GHz
0.9 GHz
2-Tone, 5 MHz spacing, +10 dBm each
0.5 GHz
0.9 GHz
Units
dB
dB
dB
Ratio
Ratio
dBm
dBm
dBm
µs
µs
mV
dBm
dBm
dBm
dBm
Min.
—
50
40
—
—
—
—
—
—
—
—
—
—
—
—
8. All measurements taken at 900 MHz in a 50 Ω system unless otherwise specified. Loss varies at 0.003 dB/°C.
Typ.
1.6
53
42
1.5:1
1.7:1
25
25
26
2
2
26
53
58
39
38
SOIC-8†
Rev. V4
Max.
1.8
—
—
—
—
—
—
—
—
—
—
—
—
—
—
†Meets JEDEC moisture sensitivity level 1 requirements.
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macomtech.com for additional data sheets and product information.
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.