DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

STR-X6759N Просмотр технического описания (PDF) - Allegro MicroSystems

Номер в каталоге
Компоненты Описание
производитель
STR-X6759N
Allegro
Allegro MicroSystems Allegro
STR-X6759N Datasheet PDF : 11 Pages
1 2 3 4 5 6 7 8 9 10
STR-X6759N
Off-Line Quasi-Resonant Switching Regulators
Features and Benefits
Quasi-resonant topology IC Low EMI noise and soft
switching
Bottom-skip mode Improved system efficiency over
the entire output load by avoiding increase of switching
frequency
Standby mode Lowers input power at very light output
load condition
Avalanche-guaranteed MOSFET Improves system-level
reliability and does not require VDSS derating
650 VDSS / 0.385 Ω RDS(on)
Various protections Improved system-level reliability
Pulse-by-pulse drain overcurrent limiting
Overvoltage Protection (bias winding voltage sensing),
with latch
Overload Protection with latch
Maximum on-time limit
Package: 7-Pin TO-3P
Not to scale
Description
The STR-X6759N is a quasi-resonant topology IC designed for
SMPS applications. It shows lower EMI noise characteristics
than conventional PWM solutions, especially at greater than
2 MHz. It also provides a soft-switching mode to turn on the
internal MOSFET at close to zero voltage (VDS bottom point)
by use of the resonant characteristic of primary inductance
and a resonant capacitor.
The package is a fully molded TO-3P, which contains the
controller chip (MIC) and MOSFET, enabling output power
up to 460 W at 230 VAC and 250 W at universal input. The
bottom-skip mode skips the first bottom of VDS and turns on the
MOSFET at the second bottom point, to minimize an increase
of operating frequency at light output load, improving system-
level efficiency over the entire load range.
A standby mode is executed by clamping the secondary output.
In general applications, standby mode reduces input power.
The soft-start mode minimizes surge voltage and reduces power
stress to the MOSFET and to the secondary rectifying diodes
during the start-up sequence.
Various protections such as overvoltage, overload, overcurrent,
maximum on-time protections and avalanche-energy guaranteed
MOSFET secure good system-level reliability.
Continued on the next page…
Typical Application
28103.30-7

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]