DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

STR-X6757_V Просмотр технического описания (PDF) - Allegro MicroSystems

Номер в каталоге
Компоненты Описание
производитель
STR-X6757_V
Allegro
Allegro MicroSystems Allegro
STR-X6757_V Datasheet PDF : 9 Pages
1 2 3 4 5 6 7 8 9
STR-X6757
Off-Line Quasi-Resonant Switching Regulators
Features and Benefits
Quasi-resonant topology IC Low EMI noise and soft
switching
Bottom-skip mode Improved system efficiency over
the entire output load by avoiding increase of switching
frequency
Auto-Standby mode Lowers input power at very light
output load condition
Avalanche-guaranteed MOSFET Improves system-level
reliability and does not require VDSS derating
650 VDSS / 0.62 Ω RDS(on)
Various protections Improved system-level reliability
Pulse-by-pulse drain overcurrent limiting
Overvoltage Protection (bias winding voltage sensing),
with latch
Overload Protection with latch
Maximum on-time limit
Package: 7-Pin TO-3P
Description
The STR-X6757 is a quasi-resonant topology IC designed for
SMPS applications. It shows lower EMI noise characteristics
than conventional PWM solutions, especially at greater than
2 MHz. It also provides a soft-switching mode to turn on the
internal MOSFET at close to zero voltage (VDS bottom point)
by use of the resonant characteristic of primary inductance
and a resonant capacitor.
The package is a fully molded TO-3P, which contains the
controller chip (MIC) and MOSFET, enabling output power
up to 320 W at 230 VAC and 165 W at universal input. The
bottom-skip mode skips the first bottom of VDS and turns on the
MOSFET at the second bottom point, to minimize an increase
of operating frequency at light output load, improving system-
level efficiency over the entire load range.
There are two standby modes available to reduce the input power
under very light load conditions. The first is Auto-Standby
mode, which is internally triggered by periodic sensing, and
the other is a manual standby mode, which is executed by
clamping the secondary output. In general applications, the
manual standby mode reduces the input power further compared
to Auto-Standby mode.
Not to scale
Continued on the next page…
Typical Application
STRX6757DS
SANKEN ELECTRIC CO., LTD.
http://www.sanken-ele.co.jp/en/

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]