LA2010 Просмотр технического описания (PDF) - SANYO -> Panasonic

Номер в каталоге

Компоненты Описание

производитель

LA2010

Audio Level Sensor

SANYO -> Panasonic 

Ordering number:ENN1343D

Monolithic Linear IC

LA2010

Audio Level Sensor

Overview

The LA2010 is an IC for detecting interprogram spaces to

pick out the starting point of a program immediately pre-

ceding or following musical program recorded on tape.

Package Dimensions

unit:mm

3017C-SIP9

[LA2010]

Applicable Sets

• Radio-cassette recorders.

• Cassette decks.

• Car stereos.

22.3

1.5

3.0

Application

• Detection of spaces between programs recorded on tape.

1

Features

0.99

2.54

0.5

• Built-in transistor capable of driving plunger with 600mA

max. and protective diode to prevent induced reverse volt-

age.

• Capable of desired timing setting by using external C, R.

• Detects unrecorded areas of tape and drives plunger.

• Built-in preventer to prevent plunger from malfunction-

ing at the time of application of power.

• Built-in detector to detect recorded area.

9

1.3

0.25

1.35

SANYO : SIP9

Specifications

Maximum Ratings at Ta = 25˚C

Parameter

Maximum supply voltage

Flow-in current

Allowable power dissipation

Operating temperature

Storage temperature

Symbol

VCC max

I6 max

Pd max

Topr

Tstg

Conditions

Note ) · The voltage on pin 1 must not exceed the voltage on pin 9.

· The current flowing into pin 2 and pin 4 must not exceed ±0.5mA continuously.

· The voltage on pin 8 is 2.5V max. and must not exceed the voltage on pin 7.

Ratings

Unit

15 V

600 mA

540 mW

–20 to +75 ˚C

–40 to +125 ˚C

Any and all SANYO products described or contained herein do not have specifications that can handle

applications that require extremely high levels of reliability, such as life-support systems, aircraft’s

control systems, or other applications whose failure can be reasonably expected to result in serious

physical and/or material damage. Consult with your SANYO representative nearest you before using

any SANYO products described or contained herein in such applications.

SANYO assumes no responsibility for equipment failures that result from using products at values that

exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other

parameters) listed in products specifications of any and all SANYO products described or contained

herein.

SANYO Electric Co.,Ltd. Semiconductor Company

TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN

11200TH (KT)/5085MW/2146KI/0267KI No.1343–1/8

Share Link: