Philips Semiconductors
Audio CODEC
Preliminary specification
UDA1342TS
10 LIMITING VALUES
In accordance with the Absolute Maximum Rating System (IEC 60134).
SYMBOL
PARAMETER
VDD
Txtal(max)
Tstg
Tamb
Ves
supply voltage
maximum crystal temperature
storage temperature
ambient temperature
electrostatic handling voltage
Ilu(prot)
Isc(DAC)
latch-up protection current
short-circuit current of DAC
note 1
CONDITIONS
note 2
note 3
Tamb = 125 °C; VDD = 3.6 V
Tamb = 0 °C; VDD = 3 V; note 4
output short-circuited to VSSA(DAC)
output short-circuited to VDDA(DAC)
MIN.
−
−
−65
−40
−1 100
−250
-
−
−
Notes
1. All supply connections must be made to the same power supply.
2. Equivalent to discharging a 100 pF capacitor via a 1.5 kΩ series resistor.
3. Equivalent to discharging a 200 pF capacitor via a 0.75 µH series inductor.
4. DAC operation after short-circuiting cannot be warranted.
MAX.
4
150
+125
+85
+1 100
+250
200
UNIT
V
°C
°C
°C
V
V
mA
450
mA
325
mA
11 HANDLING
Inputs and outputs are protected against electrostatic discharge in normal handling. However, to be totally safe, it is
desirable to take normal precautions appropriate to handling MOS devices.
12 QUALITY SPECIFICATION
In accordance with “SNW-FQ-611-E”.
13 THERMAL CHARACTERISTICS
SYMBOL
PARAMETER
CONDITIONS
Rth(j-a)
thermal resistance from junction to ambient in free air
VALUE
90
UNIT
K/W
14 DC CHARACTERISTICS
VDDD = VDDA(ADC) = VDDA(DAC) = 3.0 V; Tamb = 25 °C; RL = 5 kΩ; all voltages measured with respect to ground; unless
otherwise specified.
SYMBOL
PARAMETER
CONDITIONS
MIN.
TYP.
MAX.
UNIT
Supplies; note 1
VDDA(ADC)
VDDA(DAC)
VDDD
ADC analog supply voltage
DAC analog supply voltage
digital supply voltage
2.7
3.0
3.6
V
2.7
3.0
3.6
V
2.7
3.0
3.6
V
2000 Mar 29
28