SMT06C Просмотр технического описания (PDF) - Emerson Network Power
Номер в каталоге
Компоненты Описание
производитель
SMT06C Datasheet PDF : 4 Pages
| |||
Embedded Power for
Business-Critical Continuity
Ordering Information
Output
Power
(max)
Input
Voltage
Output
Voltage (11)
20 W
30 W
4.5-5.5 Vdc
0.9-3.3 V
10.2 - 13.8 Vdc 0.9-5.0 V
Output
Current
(min)
0A
0A
Output
Current
(max)
6A
6A
Maximum
Load (typ)
89%
91%
Regulation
Line
±0.2%
±0.2%
Load
±0.5%
±0.5%
Model Numbers (12, 13)
SMT06C-05SADJJ
SMT06C-12SADJJ
All specifications are typical at nominal input Vin = 12 V, full load at 25°C unless otherwise stated.
Part Number System with Options
Product Family
SMT
Rated Output
Current
06
Performance
C
Input Voltage
12
SMT = Surface Mount 06 = 6 A
C = C Series
05 = 4.5 Vdc to 5.5 Vdc
12 = 10.2 Vdc to 13.8 Vdc
Number of Outputs
SADJ
SADJ = Single Adjustable
Output
Output Voltage Adjustment of the SMT20C Series
The ultra-wide output voltage trim range offers major advantages to users who
select the SMT06C series. It is no longer necessary to purchase a variety of
modules in order to cover different output voltages. The output voltage can be
trimmed in a range of 0.9 Vdc to 5.0 Vdc. When the SMT06C series converter
leaves the factory the output has been adjusted to the default voltage of 0.9 V.
Rev. 08.20.08_j93
SMT06C
3 of 4
Packaging Options
J
J = PB-free (RoHS 6/6 compliant)
Notes
1 di/dt = 10 A/μs, Vin = Nom, Tc = 25 °C, load change = 0.50 lo max. to 0.75 lo
max. and 0.75 lo max. to 0.5 lo max.
2 Measured with external filter. See Application Note 169 for details.
3 Power up is the time from application of dc input to Power Good high.
Remote ON/OFF asserted high to Power Good high.
4 This product is only for inclusion by professional installers within other
equipment and must not be operated as a stand alone product.
5 Measured as per recommended set-up. Cin = 270 μF (20 mW ESR max.).
Cout = 680 μF (10 mW ESR max.).
6 Uses external resistor from trim to ground. Minimum value 485 W for 5 V
model, 280 W for 12 V model. See Application Note 169 for details.
7 Signal line assumed <3 m.
8 External input fusing recommended.
9 See Application Note 169 for operation above 50 ºC.
10 See Application Note 169 for more details.
11 TSE RoHS 5/6 (non Pb-free) compliant versions may be available on special
request, please contact your local sales representative for details.
12 NOTICE: Some models do not support all options. Please contact your local
representative or use the on-line model number search tool at
www.powerconversion.com to find a suitable alternative.
Ripple and Noise Specification
Model
Output
Voltage
5 V input models 0.9 Vdc to 2.5 Vdc
3.3 Vdc
12 V input models 0.9 Vdc to 2.5 Vdc
3.3 Vdc to 5 Vdc
Pk - Pk
30 mV
40 mV
40 mV
50 mV
RMS
15 mV
15 mV
20 mV
20 mV
Share Link: 