SM16LC08C Просмотр технического описания (PDF) - Microsemi Corporation
Номер в каталоге
Компоненты Описание
производитель
SM16LC08C Datasheet PDF : 2 Pages
| |||
8700 E. Thomas Road
Scottsdale, AZ 85251
Tel: (480) 941-6300
Fax: (480) 947-1503
SM16LC03C
thru
SM16LC24C
DESCRIPTION (300 watt)
This 16 pin 8 line Low Capacitance Bidirectional array is designed for
use in applications where protection is required at the board level from
voltage transients caused by electrostatic discharge (ESD) as defined
in IEC 1000-4-2, electrical fast transients (EFT) per IEC 1000-4-4 and
effects of secondary lighting.
TVSarray™ Series
These TRANSIENT VOLTAGE SUPPRESSOR (TVS) Diode Arrays
have a peak power of 300 watts for an 8/20 µsec pulse and are
designed to protect 3.0/3.3 volt components such as DRAM’s, SRAM’s, CMOS, HCMOS, HSIC, and low
voltage interfaces up to 24 volts.
FEATURES
• Protects 3.0/3.3 up through 24V Components
• Protects 8 lines Bidirectional
• Provides electrically isolated protection
• SO-16 Packaging
MECHANICAL
• Molded SO-16 Surface Mount
• Weight: 0.128 grams (approximate)
• Body Marked with Logo, and device number
• Pin #1 defined by DOT on top of package
• Encapsulation meets UL 94V-0
MAXIMUM RATINGS
• Operating Temperatures: -550C to +1500C
• Storage Temperature: -550C to +1500C
• Peak Pulse Power: 300 Watts (8/20 µsec, Figure 1)
• Pulse Repetition Rate: <.01%
PACKAGING
• Tape & Reel EIA Standard 481-1-A
• 13 inch reel 2,500 pieces (OPTIONAL)
• Carrier tubes 48 pcs per (STANDARD)
ELECTRICAL CHARACTERISTICS PER LINE @ 250C Unless otherwise specified
PART
NUMBER
DEVICE
MARKING
STAND
OFF
VOLTAGE
VWM
VOLTS
MAX
BREAKDOWN
VOLTAGE
VBR
@1 mA
VOLTS
MIN
CLAMPING
VOLTAGE
VC
@ 1 Amp
(FIGURE 2)
VOLTS
MAX
CLAMPING
VOLTAGE
VC
@ 5 Amp
(FIGURE 2)
VOLTS
MAX
LEAKAGE
CURREN
T
ID
@ VWM
µA
MAX
CAPACITANCE
(f=1 MHz)
@0V
C
pF
TYP
SM16LC03C
MAA
3.3
4
7.0
9.0
200
25
SM16LC05C
MAB
5.0
6
9.8
11
20
25
SM16LC08C
MAF
8.0
8.5
13.4
16.6
1
25
SM16LC12C MAC
12
13.3
19
24
1
25
SM16LC15C MAD
15
16.7
24
30
1
25
SM16LC24C
MAE
24
26.7
43
55
1
25
Part numbers with a “C” suffix are bidirectional devices
TEMPERATURE
COEFFICIENT
OF VBR
áVBR
mV/°C
MAX
-5
1
5
8
11
28
NOTE: Transient Voltage Suppression (TVS) product is normally selected based on its stand off voltage
VWM. Product selected voltage should be equal to or greater than the continuous peak operating voltage of
the circuit to be protected.
Application: The SM16CXXC product is designed for transient voltage suppression protection of
components at the board level. It is an ideal product to be used for protection of I/O Transceivers.
MSC0884.PDF
ISO 9001 CERTIFIED
REV M 7/07/2000
Share Link: 