SIL05E-05W3V3-VJ Просмотр технического описания (PDF) - Artesyn Technologies
Номер в каталоге
Компоненты Описание
производитель
SIL05E-05W3V3-VJ Datasheet PDF : 3 Pages
| |||
SIL05E Series Data Sheet
General Specifications
Efficiency
Insulation voltage
Switching frequency
Fixed
Approvals and
standards
Material flammability
Dimensions
LxWxH
Weight
Coplanarity
MTBF
Telcordia SR-332
94%
Non-isolated
300 kHz typical
EN60950
UL/cUL60950
UL94V-0
22.90 x 7.09 x 10.21 mm
0.902 x 0.279 x 0.402 inches
2.5 g (0.09 oz)
100 μm
9,009,000 hours
Environmental Specifications
Thermal performance Operating ambient temperature
See Note 2
Non-operating temperature
Protection
Short-circuit
Continuous
Thermal
Automatic recovery
-40 °C to +85 °C
-40 °C to +125 °C
EMC Characteristics
Electrostatic discharge
EN61000-4-2, IEC801-2
Conducted immunity
EN61000-4-6
Radiated immunity
EN61000-4-3
Ordering Information
Model
Number (3, 4)
SIL05E-05W3V3-VJ
Output Power
(Max.)
18.15 W
Input
Voltage
3.0 - 5.5 Vdc
Output
Voltage
0.75 - 3.63 Vdc
Output Current
(Min.)
0A
Output Current
(Max.)
5A
Efficiency
(Typical)
94%
Regulation
Line
±1.0%
Load
±1.0%
Part Number System with Options
Product Family
SIL
SIL = Single In Line
Rated Output
Current
05
05 = 5 Amps
Performance
E
-
E = Enhanced
Performance
Input Voltage
05
05 = 3.0 - 5.5 Vdc
Type of Output
W
W = Wide
Output Voltage
3V3
0.75 - 3.63 Vdc
Mounting/Packaging
Options
- VJ
V = Vertical
H = Horizontal
J = Pb-free RoHS 6/6
compliant
Output Voltage Adjustment
The ultra-wide output voltage trim range offers major advantages to users
who select the SIL05E-05W3V3. It is no longer necessary to purchase a
variety of modules in order to cover different output voltages. The output
voltage can be trimmed in a range of 0.75 to 3.63 Vdc.
When the SIL05E-05W3V3 converter leaves the factory, the output has been
adjusted to the default voltage of 0.75 V.
• When Vin >4.5 V, then Vout can be adjusted from 0.75 - 3.63 Vdc
• When Vin <4.5 V, then Vout can be adjusted from 0.75 - 2.75 Vdc
Notes:
1. The SIL05E features a ‘Negative Logic’ Remote ON/OFF operation. If not using the Remote ON/
OFF pin, leave the pin open (the converter will be on). The Remote ON/OFF pin is referenced to
ground. The following conditions apply for the SIL05E:
Configuration Converter Operation
Remote pin open circuit
Unit is ON
Remot pin pulled low
Unit is ON
Remote pinpulled high [Von/off > 2.5 V]
Unit is OFF
A ‘Positive Logic’ Remote ON/OFF version is also possible with this converter. To order please
use part number SIL05E-05W3V3-VRJ.
2. Full derating curves available in both the Longform (Technical Reference) and Application Note.
3. For horizontal mounting option, please consult factory for details.
4. NOTICE: Some models do not support all options. Please contact your local Artesyn Embedded
Technologies representative or use the on-line model number search tool at
http://www.Artesyn.com/power to find a suitable alternative.
Share Link: 