SAA7104E Просмотр технического описания (PDF) - Philips Electronics

Номер в каталоге

Компоненты Описание

производитель

SAA7104E

Digital video encoder

Philips Electronics 

Philips Semiconductors

Digital video encoder

Product specification

SAA7104E; SAA7105E

1 FEATURES

• Digital PAL/NTSC encoder with integrated high quality

scaler and anti-flicker filter for TV output from a PC

• Supports Intel® Digital Video Out (DVO) low voltage

interfacing to graphics controller

• 27 MHz crystal-stable subcarrier generation

• Maximum graphics pixel clock 85 MHz at double edged

clocking, synthesized on-chip or from external source

• Programmable assignment of clock edge to bytes (in

double edged mode)

• Synthesizable pixel clock (PIXCLK) with minimized

output jitter, can be used as reference clock for the VGC,

as well)

• PIXCLK output and bi-phase PIXCLK input (VGC clock

loop-through possible)

• Hot-plug detection through dedicated interrupt pin

• Supported VGA resolutions for PAL or NTSC legacy

video output up to 1280 × 1024 graphics data at

60 or 50 Hz frame rate

• Supported VGA resolutions for HDTV output up to

1920 × 1080 interlaced graphics data at 60 or 50 Hz

frame rate

• Three Digital-to-Analog Converters (DACs) for CVBS

(BLUE, CB), VBS (GREEN, CVBS) and C (RED, CR) at

27 MHz sample rate (signals in parenthesis are

optionally), all at 10-bit resolution

• Non-interlaced CB-Y-CR or RGB input at maximum

4 : 4 : 4 sampling

• Downscaling and upscaling from 50 to 400%

• Optional interlaced CB-Y-CR input of Digital Versatile

Disk (DVD) signals

• Optional non-interlaced RGB output to drive second

VGA monitor (bypass mode, maximum 85 MHz)

• 3 × 256 bytes RGB Look-Up Table (LUT)

• Support for hardware cursor

• HDTV up to 1920 × 1080 interlaced and 1280 × 720

progressive, including 3-level sync pulses

• Programmable border colour of underscan area

• Programmable 5 line anti-flicker filter

• On-chip 27 MHz crystal oscillator (3rd-harmonic or

fundamental 27 MHz crystal)

• Fast I2C-bus control port (400 kHz)

• Encoder can be master or slave

• Adjustable output levels for the DACs

• Programmable horizontal and vertical input

synchronization phase

• Programmable horizontal sync output phase

• Internal Colour Bar Generator (CBG)

• Optional support of various Vertical Blanking Interval

(VBI) data insertion

• Macrovision™(1) Pay-per-View copy protection system

rev. 7.01, rev. 6.1 and rev. 1.03 (525p) as option; this

applies to the SAA7104E only. The device is protected

by USA patent numbers 4631603, 4577216 and

4819098 and other intellectual property rights. Use of

the Macrovision anti-copy process in the device is

licensed for non-commercial home use only. Reverse

engineering or disassembly is prohibited. Please

contact your nearest Philips Semiconductors sales

office for more information.

• Optional cross-colour reduction for PAL and NTSC

CVBS outputs

• Power-save modes

• Joint Test Action Group (JTAG) boundary scan test

• Monolithic CMOS 3.3 V device, 5 V tolerant I/Os.

(1) Macrovision™ is a trademark of the Macrovision Corporation.

2004 Mar 04

3

Share Link: