132 SEG / 65 COM DRIVER & CONTROLLER FOR STN LCD PRELIMINARY SPEC. VER. 0.9
S6B0723
Built-in Analog Circuit
− On-chip oscillator circuit for display clock (external clock can also be used)
− High performance voltage converter (with booster ratios of x2, x3, x4 and x5, where the step-up reference
voltage can be used externally)
− High accuracy voltage regulator (temperature coefficient: -0.05%/°C or external input)
− Electronic contrast control function (64 steps)
− Vref = 2.1V ± 3% (V0 voltage adjustment voltage)
− High performance voltage follower (V1 to V4 voltage divider resistors and OP-Amp for increasing drive
capacity)
Operating Voltage Range
− Supply voltage (VDD): 2.4 to 3.6V
− LCD driving voltage (VLCD = V0 - VSS): 4.5 to 15.0V
Low Power Consumption
− Operating power: 40µΑ typical (conditions: VDD = 3V, x 4 boosting (VCI = VDD), V0 = 11V, Internal power supply
ON, display OFF and normal mode is selected)
− Standby power: 10 µΑ maximum (during power save[standby] mode)
Operating Temperatures
− Wide range of operating temperatures : -40 to 85°C
CMOS Process
Package Type
− TCP
2