RE46C165S Просмотр технического описания (PDF) - Microchip Technology

Номер в каталоге

Компоненты Описание

производитель

RE46C165S

CMOS Photoelectric Smoke Detector ASIC with Interconnect, Timer Mode and Alarm Memory

Microchip Technology 

RE46C165/6/7/8

2.0 PIN DESCRIPTIONS

The descriptions of the pins are listed in Table 2-1.

TABLE 2-1: PIN FUNCTION TABLE

RE46C165/6/7/8

PDIP, SOIC

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

Symbol

C1

C2

DETECT

STROBE

VDD

IRED

IO

HB

HS

FEED

LED

COSC

ROSC

VSS

VSEN

TEST

Function

High Gain Capacitor Pin

Normal Gain Capacitor Pin

Photo Diode Input

Strobed Detection Negative Supply

Positive Power Supply

Infrared Emitting Diode Pin

Interconnect Pin

Horn Brass, Inverted Output

Horn Silver Output

Horn Feedback Pin

LED Driver Pin

Oscillator Capacitor Input

Oscillator Resistor Drive Low

Negative Power Supply

Hush Timer Sensitivity Pin

Test Pin

2.1 High/Normal Gain Capacitor Pins

(C1, C2)

The capacitor connected to the C1 pin sets the photo

amplifier gain (high) for the push-to-test and chamber

sensitivity test. The size of this capacitor will depend on

the chamber background reflections. A = 1 + (C1/10),

where C1 is expressed in pF. The gain should be

<10000.

The capacitor connected to the C2 pin sets the photo

amplifier gain (normal) during standby. The value of this

capacitor will depend on the smoke sensitivity required.

A = 1 + (C2/10), where C2 is expressed in pF.

2.2 Photo Diode Input (DETECT)

This input is normally connected to the cathode of an

external photo diode operated at zero bias.

2.3 Strobed Detection

Negative Supply (STROBE)

Regulated output voltage of VDD – 5, which is active

during a test for smoke. This output is the negative side

of the photo amplifier reference circuitry.

2.4 Positive Power Supply (VDD)

The VDD pin is the device’s positive power supply input.

2.5 Infrared Emitting Diode Pin (IRED)

Provides a regulated pulsed output voltage pre-driver

for the infrared emitter. This output usually drives the

base of an NPN transistor.

2.6 Interconnect Pin (I/O)

This bidirectional pin provides the capability to

interconnect many detectors in a single system. This

pin has an internal pull-down device.

2.7 Horn Brass, Inverted Output (HB)

The HB pin is connected to the metal electrode of a

piezoelectric transducer.

2.8 Horn Silver Output Pin (HS)

The HS pin is a complementary output to HB and

connects to the ceramic electrode of the piezoelectric

transducer.

 2010 Microchip Technology Inc.

DS22251A-page 11

Share Link: