PC8260MTPU200 Просмотр технического описания (PDF) - Atmel Corporation

Номер в каталоге

Компоненты Описание

производитель

PC8260MTPU200

PowerPC-based Communications Processors

Atmel Corporation 

Features

• PC603e™ Microprocessor (Embedded PowerPC™ Core) at 100 - 200 MHz

– 140 MIPS at 100 MHz (Dhrystone 2.1)

– 280 MIPS at 200 MHz (Dhrystone 2.1)

– High-performance, Superscalar Microprocessor

– Disable CPU Mode

– Improved Low-power Core

– 16-Kbyte Data and 16-Kbyte Instruction Cache, Four-way Set Associative

– Memory Management Unit

– No Floating Point Unit

– Common On-chip Processor (COP)

• System Integration Unit (SIU)

– Memory Controller, Including Two Dedicated SDRAM Machines

– PCI up to 66 MHz (Available in Subsequent Versions)

– Hardware Bus Monitor and Software Watchdog Timer

– IEEE 1149.1 JTAG Test Access Port

• High-performance Communications Processor Module (CPM) with Operating

Frequency up to 166 MHz

– PowerPC and CPM May Run at Different Frequencies

– Supports Serial Bit Rates up to 710 Mbps at 133 MHz

– Parallel I/O Registers

– On-board 24 KBytes of Dual-port RAM

– Two Multi-channel Controllers (MCCs) Each Supporting 128 Full-duplex, 64-Kbps,

HDLC Lines

– Virtual DMA Functionality

• Two Bus Architectures: One 64-bit PowerPC and One 32-bit Local Bus (or PCI on

PC8265)

• Two UTOPIA Level-2 Master/Slave Ports, Both with Multi-PHY Support. One Can

Support 8/16 bit Data

• Three MIL Interfaces

• Eight TDM Interfaces (T1/E1), Two TDM Ports Can Be Glueless to T3/E3

• Power Consumption: 2.5W at 133 MHz

PowerPC-based

Communications

Processors

PC8260

PowerQUICC II™

Description

The PC8260 PowerQUICC II™ is a versatile communications processor that inte-

grates on one chip, a high-performance PowerPC (PC603e) RISC microprocessor, a

highly flexible system integration unit, and many communications peripheral control-

lers that can be used in a variety of applications, particularly in communications and

networking systems.

The core is an embedded variant of the PC603e microprocessor, specifically referred

to later in this document as the EC603e, with 16 Kbytes of instruction cache and 16

Kbytes of data cache and no floating-point unit (FPU). The system interface unit (SIU)

consists of a flexible memory controller that interfaces to almost any user-defined

memory system, a 60x-to-PCI bus bridge (available in future revisions) and many

other peripherals, making this device a complete system on a chip.

The communications processor module (CPM) includes all the peripherals found in

the PC860, with the addition of three high-performance communication channels that

support new emerging protocols (for example, 155-Mbps ATM and Fast Ethernet).

Equipped with dedicated hardware, the PC8260 can handle up to 256 full-duplex,

time-division, multiplexed logical channels.

Rev. 2131B–HIREL–02/03

1

Share Link: