OPB460L11Z Просмотр технического описания (PDF) - Optek Technology

Номер в каталоге

Компоненты Описание

производитель

OPB460L11Z

Photologic® Slotted Optical Switch

Optek Technology 

Photologic® Slotted Optical Switch

OPB460, OPB470, OPB480, OPB490 Series

Absolute Maximum Ratings (TA=25°C unless otherwise noted)

Storage & Operating Temperature Range

Lead Soldering Temperature [1/16 inch (1.6mm) from the case for 5 sec. with soldering iron](1)

Input Infrared LED

Supply Voltage, VCC (not to exceed 3 seconds)

Diode Forward DC Current

Diode Reverse DC Voltage

Input Diode Power Dissipation(2)

Output Photologic®

Voltage at Output Lead (Open Collector Output)

Output Photologic® Power Dissipation(3)

-40° C to +85° C

260°C

18 V

40 mA

2V

75 mW

25 V

200 mW

Total Device Power Dissipation(4)

275 mW

Notes:

(1) RMA flux is recommended. Duration can be extended to 10 seconds maximum when flow soldering.

(2) Derate linearly 1.67 mW/°C above 25° C (OPB460, OPB470) or derate linearly 1.82 mW/°C above 25° C (OPB480, OPB490).

(3) Derate linearly 1.50 mW/°C above 25° C (OPB460, OPB470) or derate linearly 1.64 mW/°C above 25° C(OPB480, OPB490).

(4) Derate linearly 3.17 mW/°C above 25° C (OPB460, OPB470) or derate linearly 3.45 mW/°C above 25° C (OPB480, OPB490).

(5) The OPB460/OPB470 series are terminated with 0.020” square leads designed for printed circuit board mounting.

(6) The OPB480/OPB490 series of switches are terminated with 24” (609.600 mm) of 7-strand 26 AWG, UL rated insulated wire on

each terminal. Insulation colors and functions are: red (anode), black (cathode), white (VCC,), blue (output) and green (ground).

Other wire lengths and/or colors in addition to customer selected connectors are available. Contact your local representative or

call the factory.

OPB460/470/480/490 Buffered 10K Pull-Up

OPB461/471/481/491 Buffered Open-Collector

OPB462/472/482/492 Inverted 10K Pull-Up

OPB463/473/483/493 Inverted Open-Collector

OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.

OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006

Phone: (972) 323-2200 or (800) 341-4747

FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com

Issue A.3 06/14

Page 3 of 7

Share Link: