OPB355T Просмотр технического описания (PDF) - Optek Technology

Номер в каталоге

Компоненты Описание

производитель

OPB355T

Slotted Optical Switch

Optek Technology 

Slotted Optical Switch

OPB355, OPB360, OPB370, OPB380, OPB390

OPB859, OPB860, OPB870, OPB880, OPB890

Series

Absolute Maximum Ratings (TA=25°C unless otherwise noted)

Storage Temperature(1) (2)

OPB355, OPB360, OPB370, OPB859, OPB860, OPB870 Series

OPB380, OPB390, OPB880, OPB890 Series

Operating Temperature(1) (2)

Lead Soldering Temperature(7)

Input LED

Forward DC Current

OPB355, OPB360, OPB370, OPB380, OPB390, OPB859, OPB860, OPB870, OPB880, OPB890

Peak Forward Current (1µs pulse width, 300 pps)

Reverse DC Voltage

Power Dissipation(2)

Output Phototransistor/Diode

Cathode-Anode Reverse Voltage -OPB355

Collector-Emitter Voltage

OPB360, OPB370, OPB380, OPB390, OPB859, OPB860, OPB870, OPB880, OPB890 Series

Emitter-Collector Voltage

Collector DC Current

Power Dissipation(1)

-40° C to +100° C

-40° C to +85° C

-40° C to +85° C

260° C

50 mA

1A

2V

75 mW

60 V

30 V

5V

30 mA

100 mW

Notes:

(1) For wire series (OPB380, OPB390, OPB880 and OPB890), maximum storage and operating temperature is limited by the

temperature rating of the lead wires.

(2) Derate linearly 1.67 mW/° C above 25° C.

(3) For OPB355, OPB360 and OPB370, polarity is denoted by color of housing top: LED (clear); sensor (black).

(4) Cleaning agents methanol and isopropanol are recommended. Spray or wipe; do not submerge.

(5) OPB380 and OPB390 wire terminations have 24” of 7-strand 26 AWG UL approved insulated wire on each terminal. These

devices incorporate a wire strain relief at the housing surface. The insulation colors and functions are: IRED anode (red); IRED

cathode (black); phototransistor collector (white); phototransistor emitter (green).

(6) RMA flux is recommended. Duration can be extended to 10 seconds maximum when flow soldering.

(7) All parameters were tested using pulse technique.

OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.

OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006

Phone: (972) 323-2200 or (800) 341-4747

FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com

Issue A.8 5/09

Page 5 of 10

Share Link: