OPB355T Просмотр технического описания (PDF) - Optek Technology
Номер в каталоге
Компоненты Описание
производитель
OPB355T Datasheet PDF : 10 Pages
| |||
Slotted Optical Switch
OPB355, OPB360, OPB370, OPB380, OPB390
OPB859, OPB860, OPB870, OPB880, OPB890
Series
Optek Assembly
Part Number Guide — OPB859
OPB 8 5 9
Phototransistor Output Family
Emitter Aperture: 0.050” (1.270 mm)
Sensor Aperture: 0.050” (1.270 mm)
Mounting Configuration:
T — Two mounting tabs
Optek Assembly
Phototransistor Output Family
Discrete Shell Material:
6 — Base mount IR transmissive
Plastic discrete shell
PCMountable leads
7 — Base mount opaque
Plastic discrete shell
PCMountable leads
Part Number Guide — OPB860 / OPB870
OPB 8 X X X X X
Sensor Aperture:
1 — 0.010” (0.254 mm)
5 — 0.050” (1.270 mm)
Emitter Aperture:
1 — 0.010” (0.254 mm)
5 — 0.050” (1.270 mm)
Electrical Specification Variations:
0 = Electrical Parameter A (lead spacing = 0.320”)
1 = Electrical Parameter B (lead spacing = 0.320”)
2 = Electrical Parameter C (lead spacing = 0.320”)
5 = Electrical Parameter A (lead spacing = 0.220”)
6 = Electrical Parameter B (lead spacing = 0.220”)
7 = Electrical Parameter C (lead spacing = 0.220”)
Mounting Configurations:
N — No mounting tabs
L — Emitter side mounting tab only
T — Two mounting tabs
P — Phototransistor side mounting side
Note: Assemblies with dual 0.010” apertures are
currently available with electrical parameter
“A” only.
Optek Assembly
Phototransistor Output Family
Discrete Shell Material:
8 — Base mount IR transmissive
Plastic discrete shell
9 — Base mount opaque
Plastic discrete shell
Part Number Guide — OPB880 / OPB890
OPB 8 X X X X X Z
RoHS Compliant
Sensor Aperture:
1 — 0.010” (0.254 mm)
5 — 0.050” (1.270 mm)
Emitter Aperture:
1 — 0.010” (0.254 mm)
5 — 0.050” (1.270 mm)
Electrical Specification Variations:
0 = Electrical Parameter A
1 = Electrical Parameter B
2 = Electrical Parameter C
Note: Assemblies with dual 0.010” apertures are
currently available with electrical parameter
“A” only. Wires = 26AWG—24” Long, UL
approved
Mounting configurations:
L — Emitter side mounting tab only
N — No mounting tabs
P — Phototransistor side mounting side
T — Two mounting tabs
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A.8 5/09
Page 3 of 10
Share Link: 