NCP5623
MAXIMUM RATINGS
Symbol
Rating
Value
Unit
Vbat
SDA, SCL
ESD
Power Supply (see Figure 4)
Digital Input Voltage
Human Body Model: R = 1500 W, C = 100 pF (Note 3)
Machine Model
−0.3 < Vbat < 7.0
V
−0.3 < V < Vbat
V
2
kV
200
V
PD
RqJC
RqJA
Power Dissipation @ TA = +85°C (Note 4)
Thermal Resistance Junction to Case
Thermal Resistance Junction to Air
235
mW
46
°C/W
170
°C/W
TA
Operating Ambient Temperature Range
−40 to +85
°C
TJ
Operating Junction Temperature Range
−40 to +125
°C
TJmax
Maximum Junction Temperature
+150
°C
Tstg
Storage Temperature Range
−65 to +150
°C
ILATCHUP
Latch−up current maximum rating per JEDEC standard: JESD78.
±100
mA
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
Moisture Sensitivity Level (MSL): 1 per IPC/JEDEC standard: J−STD−020A.
3. This device series contains ESD protection and exceeds the following tests:
Human Body Model (HBM) ±2.0 kV per JEDEC standard: JESD22−A114
Machine Model (MM) ±200 V per JEDEC standard: JESD22−A115
4. The maximum package power dissipation limit must not be exceeded.
POWER SUPPLY SECTION:
(Typical values are referenced to TA = +25°C, Min & Max values are referenced −40°C to +85°C ambient temperature, unless otherwise
noted), operating conditions 2.85 V < Vbat < 5.5 V, unless otherwise noted.
Pin
Symbol
Rating
Min
Typ
Max
Unit
13
Vbat
Power Supply
13
Istdb
Stand By Current
3.0 V ≤ Vbat ≤ 4.2 V, ILED = 0 mA
13
Iop
Operating Current,
@ILED = 0 mA, 3.0 V ≤ Vbat ≤ 4.2 V
2.7
5.5
V
0.8
1.0
mA
350
mA
3,4,5
3,4,5
ITOL
IMATCH
Fpwr
RGB Output Current Tolerance
@Vbat = 3.6 V, ILED = 10 mA
−25°C < TA < 85°C
RGB Output Current LED Matching
@Vbat = 3.6 V, ILED = 5.0 mA
Internal Clock Operating Frequency
−40°C < TA < 85°C
±3
%
±0.5
%
0.8
1
1.2
MHz
http://onsemi.com
4