NCP1392D Просмотр технического описания (PDF) - ON Semiconductor

Номер в каталоге

Компоненты Описание

производитель

NCP1392D

High-Voltage Half-Bridge Driver with Inbuilt Oscillator

ON Semiconductor 

NCP1392B, NCP1392D

MAXIMUM RATINGS TABLE

Symbol

Rating

Value

Unit

Vbridge High Voltage Bridge Pin − Pin 6

−1 to +600

V

Vboot − Floating Supply Voltage

Vbridge

0 to 20

V

VDRV_HI High−Side Output Voltage

Vbridge − 0.3 to

V

Vboot + 0.3

VDRV_LO Low−Side Output Voltage

dVbridge/dt Allowable Output Slew Rate

−0.3 to VCC +0.3

$50

V

V/ns

ICC

V_Rt

Maximum Current that Can Flow into VCC Pin (Pin 1), (Note 1)

Rt Pin Voltage

20

mA

−0.3 to 5

V

RqJA

RqJA

Maximum Voltage, All Pins (Except Pins 4 and 5)

Thermal Resistance Junction−to−Air, IC Soldered on 50 mm2 Cooper 35 mm

Thermal Resistance Junction−to−Air, IC Soldered on 200 mm2 Cooper 35 mm

Storage Temperature Range

−0.3 to 10

178

147

−60 to +150

V

°C/W

°C/W

°C

ESD Capability, Human Body Model (All Pins Except HV Pins 6, 7 and 8)

2.0

kV

ESD Capability, Human Body Model (HV Pins 6, 7 and 8)

1.5

kV

ESD Capability, Machine Model

200

V

Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the

Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect

device reliability.

1. This device contains internal zener clamp connected between VCC and GND terminals. Current flowing into the VCC pin has to be limited

by an external resistor when device is supplied from supply which voltage is higher than VCCclamp (16 V typically). The ICC parameter is

specified for VBO = 0 V.

http://onsemi.com

5

Share Link: