R1280A Просмотр технического описания (PDF) - HP => Agilent Technologies
Номер в каталоге
Компоненты Описание
производитель
R1280A
HP => Agilent Technologies
R1280A Datasheet PDF : 18 Pages
| |||
Specifications for optical to electrical measurements at 1310 nm
N4373C system with network analyzer
E8361C/A -014
Specifications are valid under the stated measurement conditions.
For external source optical input all specifications are typical [f2][f5][f6].
For wavelength:
(1310 ±10) nm (option -100,102)
(O/E mode)
System perfor-
mance
Relative frequency
response uncer-
tainty [f2]
DUT response
≥ -19 dB(A/W) [f1]
≥ -29 dB(A/W)
(typical)
≥ -39 dB(A/W)
(typical)
Absolute
DUT response
frequency response
uncertainty f2]
≥ -29 dB(A/W) [f1]
Frequency re-
sponse repeatabil-
ity (typ) f2]
DUT response
≥ -19 dB(A/W)[f1]
≥ -29 dB(A/W)
≥ -39 dB(A/W))
Minimum measurable frequency
response (noise floor ) [f2] [f3][f8]
Phase uncertainty DUT response
(typ.) [f2,f4]
≥-19 dB(A/W) [f1]
≥-29 dB(A/W)
Group delay uncertainty
0.05 GHz to 0.2 GHz to
0.2 GHz
0.7 GHz
0.7 GHz to
20 GHz
±0.8 dBe typ.
±0.8 dBe
±1.0 dBe
(±0.7 dBe [f7] )
±0.7 dBe
±1.1 dBe
(±0.8 dBe [f7] )
±0.8 dBe
±0.9 dBe
±0.9 dBe
±0.9 dBe
±2.4 dBe
±2.4 dBe
(±1.5 dBe [f7] ) (±1.5 dBe ) [f7] (±1.5 dBe ) [f7]
±0.03 dBe
±0.03 dBe
±0.03 dBe
-60 dB(A/W)
±0.03 dBe
±0.03 dBe
±0.03 dBe
-60 dB(A/W)
±0.05 dBe
±0.15 dBe
±0.3 dBe
-60 dB(A/W)
±3.5°
±3.0° ±2.7°
±5.5°
±3.5° ±2.7°
Derived from phase uncertainty, see section
“Group delay uncertainty”.
Example: ±2.0° → ±8 ps (1 GHz aperture)
20 GHz to
50 GHz
±1.7 dBe
(±1.2 dBe ) [f7]
±1.3 dBe
±1.7 dBe
±2.8 dBe
(±1.8 dBe ) [f7]
±0.3 dBe
±0.5 dBe
±0.5 dBe
-60 dB(A/W)
±4.4°
±4.9°
50 GHz to
65 GHz
±2.2 dBe
(±1.5 dBe ) [f7]
±1.6 dBe
±2.8 dBe
±3.2 dBe
(±2.1 dBe ) [f7]
±0.5 dBe
±0.7 dBe
±0.8 dBe
-55 dB(A/W)
±6.0°
±7.5°
[f1] For DUT response max. -10 dB(A/W).
[f2] For +4 dBm average output power from LCA optical output.
[f3] IFBW = 10 Hz.
[f4] Except phase wrap aliasing (example: a DUT group delay of 5 ns (1 m cable length) requires a frequency step size of ≤0.2 GHz to avoid phase wraps). Excluding a
constant group delay offset of <±0.3 ns typ. (cable length uncertainty <±0.06 m). A constant group delay offset leads to a phase offset∆φ = 360° × ∆GD × fmod.(in deg).
[f5] After CW responsivity and user calibration with external source.
[f6] Requires option -100 or -102.
[f7] Typical with internal source.
[f8] Average value over frequency range.
10
Share Link: