MX25L1602MC Просмотр технического описания (PDF) - Macronix International
Номер в каталоге
Компоненты Описание
производитель
MX25L1602MC Datasheet PDF : 24 Pages
| |||
MX25L1602
FEATURES
16M-BIT [16M x 1] CMOS SERIAL FLASH EEPROM
GENERAL
• 16,777,216 x 1 bit structure
• 256 Equal Sectors with 8K-byte each
- Any sector can be erased
• 4096 Equal Segments with 512-byte each
- Provides sequential output within any segment
• Single Power Supply Operation
- 3.0 to 3.6 volt for read, erase, and program operations
• Latch-up protected to 100mA from -1V to Vcc +1V
• Low Vcc write inhibit is equal to or less than 2.5V
PERFORMANCE
• High Performance
- Fast access time: 20MHz serial clock (50pF + 1TTL
Load)
- Fast program time: 5ms/page (typical, 128-byte per
page)
- Fast erase time: 300ms/sector (typical, 8K-byte per
sector)
• Low Power Consumption
- Low active read current: 10mA (typical) at 17MHz
- Low active programming current: 10mA (typical)
- Low active erase current: 10mA (typical)
- Low standby current: 30uA (typical, CMOS)
• Minimum 100,000 erase/program cycle
SOFTWARE FEATURES
• Input Data Format
- 1-byte Command code, 3-byte address, 1-byte byte
address
• 512-byte Sequential Read Operation
• Built in 9-bit (A0 to A8) pre-settable address counter
to support the 512-byte sequential read operation
• Auto Erase and Auto Program Algorithm
- Automatically erases and verifies data at selected
sector
- Automatically programs and verifies data at selected
page by an internal algroithm that automatically times
the program pulse widths (Any page to be programed
should have page in the erased state first)
• Status Register Feature
- Provides detection of program and erase operation
completion.
- Provides auto erase/ program error report
HARDWARE FEATURES
• SCLK Input
- Serial clock input
• SI Input
- Serial Data Input
• SO Output
- Serial Data Output
• PACKAGE
- 28-pin SOP (330mil)
P/N: PM0819
REV. 1.0, MAR. 04, 2003
1
Share Link: 