MT9076B Просмотр технического описания (PDF) - Zarlink Semiconductor Inc

Номер в каталоге

Компоненты Описание

производитель

MT9076B

T1/E1/J1 3.3 V Single Chip Transceiver

Zarlink Semiconductor Inc 

MT9076B

Data Sheet

Access to the Maintenance Channel

The T1 ESF Facility Data Link (FDL) bits can be accessed in the following three ways: Through the data link pins

TxDL, RxDL, RxDLC and TxDLC; through internal registers for Bit Oriented Messages; through an embedded

HDLC.

In E1 mode, the Sa bits (bits 4-8 of the non-frame alignment signal) can be accessed in four ways: Through data

link pins TxDL, RxDL, RxDLC and TxDLC, through single byte transmit and receive registers; through five byte

transmit and receive national bit buffers; through an embedded HDLC.

Robbed Bit Signaling/Channel Associated Signaling

Robbed bit signaling and channel associated signaling information can be accessed two ways: Via the microport;

via the CSTi and CSTo pins. Signaling information is frozen upon loss of multiframe alignment.

In T1 mode, the MT9076 supports AB and ABCD robbed bit signaling. Robbed bit signaling can be enabled on a

channel by channel basis.

In E1 mode the MT9076 supports Channel Associated Signaling (CAS) multiframing.

HDLCs

The MT9076 provides three embedded HDLCs with 128 byte deep transmit and receive FIFOs.

In T1 mode, the embedded HDLCs can be assigned to any channel and can operate at 56 kbit/s or 64 kbit/s. In T1

ESF mode, HDLCO can be assigned to the 4 kbit/s FDL.

In E1 mode, the embedded HDLCs can be assigned to any timeslot and can operate at 64 kbit/s. HDLCO can be

assigned to timeslot 0 Sa bits (bits 4-8 of the non-frame alignment signal) and can operate at 4,8,12,16 or 20 kbit/s.

Performance Monitoring and Debugging

The MT9076 has a comprehensive suite of performance monitoring and debugging features. These include error

counters, loopbacks, deliberate error insertion and a 215 –1 QRS/PRBS generator/detector.

Interrupts

The MT9076 provides a comprehensive set of maskable interrupts. Interrupt sources consist of synchronization

status, alarm status, counter indication and overflow, timer status, slip indication, maintenance functions and

receive signaling bit changes.

9

Zarlink Semiconductor Inc.

Share Link: