MLX90224EVA Просмотр технического описания (PDF) - Melexis Microelectronic Systems

Номер в каталоге

Компоненты Описание

производитель

MLX90224EVA

Dual Hall Effect Switch

Melexis Microelectronic Systems  

MLX90224

Dual Hall Effect Switch

10. Reliability Information

Melexis devices are classified and qualified regarding suitability for infrared, vapor phase and wave

soldering with usual (63/37 SnPb-) solder (melting point at 183degC).

The following test methods are applied:

IPC/JEDEC J-STD-020A (issue April 1999)

Moisture/Reflow Sensitivity Classification For Nonhermetic Solid State Surface Mount Devices

CECC00802 (issue 1994)

Standard Method For The Specification of Surface Mounting Components (SMDs) of Assessed Quality

MIL 883 Method 2003 / JEDEC-STD-22 Test Method B102

Solderability

For all soldering technologies deviating from above mentioned standard conditions (regarding peak

temperature, temperature gradient, temperature profile etc) additional classification and qualification tests

have to be agreed upon with Melexis.

The application of Wave Soldering for SMD’s is allowed only after consulting Melexis regarding assurance

of adhesive strength between device and board.

For more information on manufacturability/solderability see quality page at our website:

http://www.melexis.com/

11. ESD Precautions

Electronic semiconductor products are sensitive to Electro Static Discharge (ESD).

Always observe Electro Static Discharge control procedures whenever handling semiconductor products.

3901090224

Rev. 005

Page 8 of 10

Data Sheet

July/03

Share Link: