Micrel, Inc.
Absolute Maximum Ratings(1)
Input Voltage (VIN) ...........................................................+6V
ECnoanbtinleuVouosltaDgreai(nVCENu)rr.e..n...t..(.I.D..)..(.3.)......................................+6V
TA = 25°C ................................................................. ±3A
PCuolnsTteinAdu=Dou8ras5i°nDCCiou.d.r.e.r.e.C.n..ut..r(.rI.eD..Pn..)t.(.4(.).I..S..)....(5....)....................................................................................................–...5±..60±.m20AAA
SEtSoDraRgeatTinegm–peHrBaMtu(r6e)..(.T..s..)....................................................–..5..5...°.C....t.o...+..1..5. 30k°CV
MIC94040/1/2/3
Operating Ratings(2)
Input Voltage (VIN) ..........................................+1.7 to +5.5V
Junction Temperature (TJ) .......................–40°C to +125°C
Package Thermal Resistance
MLF® (qJC) ........................................................ 90°C/W
Electrical Characteristics
TA = 25°C, bold values indicate –40°C< TA < +85°C, unless noted.
Symbol
Parameter
Condition
VEN_TH
Enable Threshold Voltage
VIN = 1.7V to 4.5V, ID = –250µA
Min
Typ
0.4
IQ
Quiescent Current
VIN = VEN = 5.5V, ID = OPEN
0.1
Measured on VIN MIC94040, MIC94041
VIN = VEN = 5.5V, ID = OPEN
7
Measured on VIN MIC94042, MIC94043
IEN
Enable Input Current
VIN = VEN = 5.5V, ID = OPEN
2.5
ISHUT-Q
Quiescent Current (shutdown) VIN = +5.5V, VEN = 0V, ID = OPEN
0.1
Measured on VIN
ISHUT-SWITCH OFF State Leakage Current
VIN = +5.5V, VEN = 0V, ID = SHORT
0.1
Measured on VOUT, (7)
RDS(ON)
P-Channel Drain to Source ON VIN = +5.0V, ID = –100mA, VEN = 1.5V
28
Resistance
VIN = +4.5V, ID = –100mA, VEN = 1.5V
30
VIN = +3.6V, ID = –100mA, VEN = 1.5V
33
VIN = +2.5V, ID = –100mA, VEN = 1.5V
45
VIN = +1.8V, ID = –100mA, VEN = 1.5V
72
VIN = +1.7V, ID = –100mA, VEN = 1.5V
82
RSHUTDOWN Turn-Off Resistance
VIN = +3.6V, ITEST = 1mA, VEN = 0V
250
(MIC94041, MIC94043)
Notes:
1. Exceeding the absolute maximum rating may damage the device.
2. The device is not guaranteed to function outside its operating rating.
3. With thermal contact to PCB. See thermal considerations section.
4. Pulse width <300µs with < 2% duty cycle.
5. Continuous body diode current conduction (reverse conduction, i.e. VOUT to VIN) is not recommended.
6. Devices are ESD sensitive. Handling precautions recommended. HBM (Human body model), 1.5kΩ in series with 100pF.
7. Measured on the MIC94040YFL and MIC94042YFL.
Max Units
1.2
V
1
µA
10
4
µA
1
µA
1
µA
55
mΩ
60
mΩ
65
mΩ
90
mΩ
145
mΩ
160
mΩ
400
Ω
May 2008
3
M9999-053008-A