MCR18EZP Просмотр технического описания (PDF) - ROHM Semiconductor
Номер в каталоге
Компоненты Описание
производитель
MCR18EZP Datasheet PDF : 6 Pages
| |||
Resistors
MCR18
Jumper type
Table 1
Resistance
Max. 50mΩ
Rated current
2A
Operating temperature −55°C to +155°C
Resistance tolerance
F (±1%)
J (±5%)
Resistance range
(Ω)
10 ≤ R ≤ 2.2M (E24,96)
1 ≤ R < 10 (E24)
10 ≤ R ≤ 10M (E24)
Resistance temperature coefficient
(ppm / °C)
±100
±400
±200
zBefore using components in circuits where they will be exposed to transients such as pulse loads (short–duration, high–level loads), be certain to evaluate the
component in the mounted state. In addition, the reliability and performance of this component cannot be guaranteed if it is used with a steady state voltage that
is greater than its rated voltage.
zCharacteristics
Item
Resistance
Variation of resistance
with temperature
Overload
Guaranteed value
Resistor type
Jumper type
J : ±5%
F : ±1%
Max. 50mΩ
See Table.1
± (2.0%+0.1Ω)
Max. 50mΩ
Solderability
A new uniform coating of minimum of
95% of the surface being immersed
and no soldering damage.
Resistance to
soldering heat
± (1.0%+0.05Ω)
Max. 50mΩ
No remarkable abnormality on the appearance.
Rapid change of
temperature
Damp heat, steady state
± (1.0%+0.05Ω)
± (3.0%+0.1Ω)
Max. 50mΩ
Max. 100mΩ
Endurance at 70°C
± (3.0%+0.1Ω)
Max. 100mΩ
Endurance
Resistance to solvent
Bend strength of
the end face plating
± (3.0%+0.1Ω)
Max. 100mΩ
± (1.0%+0.05Ω)
Max. 50mΩ
± (1.0%+0.05Ω)
Max. 50mΩ
Without mechanical damage such as breaks.
Test conditions (JIS C 5201-1)
JIS C 5201-1 4.5
JIS C 5201-1 4.8
Measurement : −55 / +25 / +125°C
JIS C 5201-1 4.13
Rated voltage (current) ×2.5, 2s.
Maximum overload voltage : 400V
JIS C 5201-1 4.17
Rosin·Ethanol (25%WT)
Soldering condition : 235±5°C
Duration of immersion : 2.0±0.5s.
JIS C 5201-1 4.18
Soldering condition : 260±5°C
Duration of immersion : 10±1s.
JIS C 5201-1 4.19
Test temp. : −55°C to +125°C 5cyc
JIS C 5201-1 4.24
40°C, 93%RH
Test time : 1,000h to 1,048h
JIS C 5201-1 4.25.1
Rated voltage (current), 70°C
1.5h : ON − 0.5h : OFF
Test time : 1,000h to 1,048h
JIS C 5201-1 4.25.3
155°C
Test time : 1,000h to 1,048h
JIS C 5201-1 4.29
23±5°C, Immersion cleaning, 5±0.5min.
Solvent : 2-propanol
JIS C 5201-1 4.33
Rev.C
2/5
Share Link: 