MCOTS-F-48-48-HZ-N-M Просмотр технического описания (PDF) - SynQor Worldwide Headquarters
Номер в каталоге
Компоненты Описание
производитель
MCOTS-F-48-48-HZ-N-M Datasheet PDF : 13 Pages
| |||
Technical Specification
MCOTS-C-28-12-QT
Output: 12V
Current: 10A
APPLICATION CONSIDERATIONS
Input System Instability: This condition can occur because
any dc-dc converter appears incrementally as a negative
resistance load. A detailed application note titled “Input System
Instability” is available on the SynQor website which provides
an understanding of why this instability arises, and shows the
preferred solution for correcting it.
Application Circuits: Figure C provides a typical circuit diagram
which details the input filtering and voltage trimming.
Vin(+)
Vout(+)
Electrolytic
Vsense(+)
Capacitor
External
Rtrim-up
Vin
Input
ON/OFF
Trim
or
Filter
Vsense(_)
R
trim-down
C
load
I
load
Vin(_)
Vout(_)
Figure C: Typical application circuit (negative logic unit, permanently enabled).
Input Filtering and External Capacitance: Figure D provides
a diagram showing the internal input filter components. This filter
dramatically reduces input terminal ripple current, which otherwise
could exceed the rating of an external electrolytic input capacitor.
The recommended external input capacitance is specified in the
Input Characteristics section on the Electrical Characteristics
page. More detailed information is available in the application note
titled “EMI Characteristics” on the SynQor website.
Vin(+)
C1
Vin(_)
Lin
C2
Regulation
Stage
Isolation
Stage
Figure D: Internal Input Filter Diagram (component values listed on the specifications page).
Product # MCOTS-C-28-12-QT Phone 1-888-567-9596
www.synqor.com
Doc.# 005-0005277 Rev. 1
06/11/09
Page 10
Share Link: 